How to break bedrock

How to Break Bedrock in Minecraft 1.18.1

Whether it’s the new Minecraft 1.18 update or the first-ever Minecraft build, one thing that hasn’t changed to date are the bedrock blocks. These are the strongest in-game blocks present at the bottom of our Minecraft worlds. You can even find bedrock covering the entire roof of the Nether dimension. With that arrives the question of how to break Bedrock in Minecraft 1.18.1 and beyond. No in-game tool, including TNT, has any effect on it. That’s why the community relies on glitches to make it work. So, let’s not waste time and figure out how to break Bedrock in Minecraft 1.18.1.

Break Bedrock in Minecraft 1.18.1 (2022)

While you are in creative mode, bedrock is easily breakable like every other block. So, we are only going to focus on survival gameplay. You can also find the logic behind it along with the actual process to understand it deeply here. This method works on both Minecraft Java and Bedrock editions. But collecting the required resources can take some time, so let’s dive in.

How to Reach the Bedrock Layer in Minecraft

Whether you are in the Nether dimension or the overworld, the easiest way to reach the Bedrock is by digging straight down. And thanks to the deep dripstone caves in Minecraft 1.18.1, it’s much easier to reach there. But that’s not the only location where Bedrock exists. You can even cross the seemingly unreachable roof of the Nether dimension. Here’s how.

1. First, make a Nether portal in Minecraft and reach the Nether dimension. Our linked guide will help you do that quickly. Do make sure to bring 3 wooden ladders and an ender pearl with you while entering this dimension.

2. Then, start placing blocks below your spawn point until you reach the topmost level. It’s located at the block height of Y=126. Once there, make sure there is no other block between you and the bedrock layer, which is located at Y=127.

3. Once you find such a spot, place your ladders leading up to the Bedrock block. There should be just enough space for you to be able to stand there and climb the ladder.

4. Finally, climb the ladder and hold your forward movement key once you reach the top. Then, aim towards the Bedrock block and throw your Ender pearl. It will teleport you directly above the Bedrock roof of the Nether.

Preparations to Break Bedrock in Minecraft 1.18.1

As of December 2021, this is the only method that seems to be working in Minecraft 1.18.1. We have personally tested it on Minecraft 1.18.1 Java edition, and it works perfectly if your timing is right. But before moving to the actual process, let’s look at the list of items we need for this method. There can be numerous ways to do it, but our method is inspired by the YouTuber Mysticat.

What Items Do I Need to Break Bedrock

If you haven’t used Redstone-based recipes before, these items might feel new to you. But they are still pretty easy to obtain. You can mine obsidian blocks using a diamond pickaxe at any location with merging water and lava sources. You can even use buckets with lava and water to make obsidian blocks. As for the rest, let’s quickly go over their crafting recipes. Do make a crafting table beforehand to save some time.

How to Obtain The Items Needed to Break Bedrock

1. First, you need a lever, and to create that, you will only need one cobblestone block and a wooden stick. Both of these are basic in-game items you can obtain easily. Then, open the Crafting table and place the cobblestone block in the second or third row. And place the wooden stick in the cell right above it to make a lever in Minecraft.

2. To make a trapdoor, you only need six wooden planks. Using them, fill any two rows of the crafting area completely. Make sure the rows you choose are adjacent, and your trapdoor will be ready. You will get two trapdoors with this Minecraft recipe.

3. Finally, you need 4 cobblestone blocks, 3 wooden planks, 1 iron ingot, and Redstone dust to create a piston. You can use our Minecraft 1.18.1 ore distribution guide to easily find iron and Redstone.

For crafting, you need to place the iron ingot in the center of the crafting area, with the Redstone dust just below it. Then, place the wooden planks in the top row of the table. To finish, fill the remaining cells on the sides of the middle column with cobblestone blocks. And that’s it! You have successfully made a piston in Minecraft.

How to Use Piston to Break Bedrock in Minecraft 1.18.1

Setup for the Method

With all the items available at your disposal, you now simply need to reach the Bedrock layer before getting started. So let’s see how to do that:

1. Choose a Bedrock block and place a piston over it. Make sure the piston is facing upwards and not in any other direction. Jumping while placing the piston helps place it with an upwards face.

2. Then, place a TNT block on top of that piston’s face and an obsidian block on either of its sides.

3. Next, you need to place any other block on top of the obsidian block. We are using cobblestone for our tutorial. Once it’s placed, put a TNT block on top of that block.

4. Finally, place the trap door on the top half of the obsidian block. And then, put the lever on the block placed on top of the obsidian block. With that, our setup is ready for action, as shown in the screenshot below.

Exploit Piston’s Obsidian Breaking Glitch

With our setup ready, it’s time to break Bedrock in Minecraft 1.18.1. Our aim is to use the lever to activate TNT and piston at the same time. Once the TNT destroys the piston, we need to replace it with another piston that can glitch out the obsidian block. Let’s see how that works:

1. You need to go through these steps as quickly as possible. So, first, get ready by holding a piston in your hand. Then, pull the lever while standing next to the obsidian block.

2. Pulling the lever will activate the TNT blocks. Now, you will have only 3 seconds to act. Activate the trapdoor while standing next to it. This step will make your character go in the swimming position (see screenshot below).

3. While you are under the trapdoor, aim at the top corner of the obsidian block. Then, start spamming the secondary action key with the piston still equipped in your hand.

4. If everything goes according to the plan, the piston will get placed facing upwards. And the bedrock block below it will be destroyed. You can repeat the process multiple times until you get it right.

How Does this Method Work in Minecraft 1.18.1

This method solely relies on piston glitching away the Bedrock. Usually, when a piston is activated, it can displace any block from its location. But it doesn’t get activated when the block we are trying to move is a Bedrock block in Mine. So, our only aim with this method is to activate a piston placed on top of a Bedrock block. The way it works is by a pure chance of timing.

Once our lever is activated, the piston placed earlier gets activated alongside two TNT blocks. As soon as the TNT destroys the piston, we place another piston facing downwards. Being in swimming mode and facing upwards help us in placing the piston. If replacement is fast enough, the game treats both the pistons the same way and activates the new piston that displaces our Bedrock block. As you might expect, this machine can have multiple variations involving Redstone, but the core principle would remain the same.

Frequently Asked Questions (FAQ)

How to Place the Second Piston Quickly?

If you are unable to press the default secondary key (usually, right-click key) quickly, you can bind that particular action to another key on your keyboard. So, when it’s time, you can press and hold that key to automatically place the second piston.

Piston was Placed, But Bedrock Didn’t Break. How to Fix?

For most players, this method won’t work on their first try. You need to repeat it multiple times until the timing is just right. In most cases, an upwards-facing second piston is a sign that it worked.

Are There Ways to Improve Chances of Breaking Bedrock with this Method?

The glitched piston method works the best in cases when the block under the Bedrock is empty. So, if you are trying it on the Nether roof, I suggest you make sure to place the piston on top of the block with ladders. It’s the same block you used for entry in the first section of this article.

How to Avoid TNT Damage in Minecraft?

If you are trying this method in survival mode, wearing enchanted armor can help avoid damage caused by TNT. But you can also create a Potion of Healing to avoid dying.

Does the Piston Method Work on Other Minecraft Versions?

Yes, apart from Minecraft 1.18, you can use it on previous Minecraft versions as well. We have tested it on Minecraft Java Edition 1.16, 1.17, and 1.18.1 versions as well.

Easiest Way to Break Bedrock in Minecraft 1.18.1

Whether it is to access the void or to build on top of the Nether roof, you now know how to break Bedrock in Minecraft 1.18.1. Now, keep in mind that you won’t be able to collect the broken Bedrock block, but you can replace it with any other block. Over the years, players have found several methods to break Bedrock, but only one has survived all the in-game patches. But you can also install Forge in Minecraft, as it provides you access to the best Minecraft mods, which you can use to break Bedrock in this sandbox game.

But if you want to stick with vanilla glitches, you should at least use our best Minecraft 1.18.1 seeds for this purpose. They can easily give you a headstart with resources and key locations near the spawn point. With that said, don’t forget to share any other method to break Bedrock in the comments section. We will make sure to test it and share it with the readers.

How to Break Bedrock in Minecraft

Are you facing issues to break Bedrock in Minecraft? Minecraft is one of the most-wanted crafting games ever. Enter the world, survive the night and create your world with your own imagination. Get Ready for a never seen before experience of endless events as you build, mine, fight mobs, and explore the ever-changing Minecraft landscape. Buddies, in this article I am going to tell you how you can Break bedrock in Minecraft? Scroll down to know more.

In Minecraft, Bedrock is not a calk walk to break. It lines the bottom of the overworld and top and bottom of the Nether. In creative mode, bedrock is easy to break like any other block. In Survival Mode, the only way to break bedrock is to find glitches in the game to exploit to break bedrock. Unfortunately, Mojang keeps patching these exploits out of the game. There are many releases of this single game with different editions like Minecraft Java Edition, Bedrock Edition, PE edition, and Minecraft Pocket edition indifferent edition, bedrock is different. So here in this article I am going to discuss Bedrock in Java edition, There are many Minecraft seeds but some are better as compared to others, and hence the best ones too.

Break Bedrock in Minecraft

Table of Contents

How to Break Bedrock??

There are various methods to break bedrock in Minecraft. I am going to discuss two methods in detail:

Method 1: Creative Mode (JAVA Edition only)

Step 1: Start the game by clicking on the grass like icon on your phone.

Step 2: Click play to launch the game. The green button at the bottom or top of the page will launch the game.

Step 3: Select a Single-player or multiplayer option according to your wish.

Step 4: Now Go for the option “Survival mode game” to play the game in survival mode.

Step 5: Open the menu. The menu is represented by three horizontal lines or + symbol in some consoles.

Step 6: Go to settings and Allow “Activate cheats”

Step 7: Click continue then, this will allow cheats in your game.

Step 8: Return to the game and open the chat

Step 9: Type /gamemode Creative and press “Enter”. This will switch your game from Survival to Creative mode.

Step 10: Now press the right trigger on the block you want to break.

Method 2: Make Bedrock Smasher

Step 1: Place any block on the top of the bedrock you want to break.

Step 2: Place a piston on one side of the marker block in such a way that the head of the piston is against the head of the marker block.

Step 3: Place a sticky piston perpendicular to other pistons.

Step 4: Remove the marker block and add five obsidian blocks to the left of the piston. Obsidian is seen in caves where lava meets water. You need a diamond pickaxe to mine obsidian.

Step 5: Place 5 more obsidian blocks perpendicular at the end of the last obsidian block. You have to make it an L-shaped structure.

Step 6: Outside the last Block, place a lever.

Step 7: On the other end of the block, Place an Activator Rail.

Step 8: Along the obsidian blocks, keep 10 Redstone repeaters (Outer side) and set them to their maximum setting(Right-click each repeater 3 times)

Step 9: Connect two sets of Redstone repeater with Redstone and on the TMT rail place a Minecraft.

Step 10: Place a stone block behind the piston.

Step 11: Activate the level to activate TNT and get to safety.

Step 12: Place a Redstone block on top of the headless piston and turn the lever off.

Step 13: Connect Redstone repeater to other pistons using Redstone and place Minecraft TMT on activator rail.

Step 14: Activate Lever and go to safety, Place a block on top of the piston.

Step 15: Turn lever off and remove repeater and obsidian blocks.

Step 16: Place piton over the block you want to break.

Step 17: Stack 4 blocks facing piston, then remove all and keep the top block only.

Step 18: Place a piston below the top block.

Step 19: Hold shift and place another piston below the piston facing down.

Step 20: Place a Redstone block next to the piston.

Step 21: Remove the top block, top piston, and the Redstone block attached to it.

Step 22: Place a cobblestone block on the floor next to the piston.

Step 23: Place three slime blocks in an L shape after the cobblestone block.

Step 24: Place a sticky piston next to the cobblestone block.

Step 25: Place four solid blocks behind the sticky piston.

Step 26: Place two Redstone comparators and two Redstone repeaters in front of solid blocks.

Step 27: Place two more Redstone comparators and repeaters in front of the other ones.

Step 28: Place Redstone in front of the Redstone comparators and repeaters. Also, Place a lever next to the Redstone.

Step 29: Use Redstone to connect the two headless pistons to the lever.

Step 30: Activate the lever, Remove Redstone blocks, Deactivate the Lever.

Conclusion

Hey buddies, Got it? I know method 2 I quiet tricky, read again you will understand. Whatever the method, you will lose you will be able to break bedrock in Minecraft.

I hope the article will be helpful for you. Share your feedback. Thank you!!

3 Ways to Break Bedrock in Minecraft 1.18.1 (2022) | How To Break Bedrock?

As all the Minecraft enthusiasts must have noticed, whether it’s the latest Minecraft 1.18 update, or even the first-ever Minecraft build, there’s been only one thing that’s been constant, the bedrock blocks. You must have noticed, the bedrock blocks are the toughest in-game Minercraft blocks which are present right at the bottom of the Minecraft worlds. On this note, the question of How to Break Bedrock in Minecraft arises.

You all must know that no type of an in-game tool, even TNT, cannot manage to destroy the bedrock, in any type of seed, whether it’s a snow biome seed, or an island biome seed, or a mountain seed. This is exactly why the Minecraft community completely relies on all the glitches to actually manage to destroy it.

As it’s been made quite clear that there are a lot of Minecraft maniacs who require help in figuring out how to break bedrock in Minecraft. Which is exactly why our article is here to guide you on How To Break Bedrock in Minecraft?

Break Bedrock in Minecraft 1.18.1 (2022)

If you happen to be in creative mode, the bedrock can be quite easily broken into, pretty much like every other common block. Which is why we would be focusing mainly on survival gameplay. If you want to, you’ll even find the logic behind the whole thing, with the real process so that you can understand it in a better way here. Thankfully, this specific method happens to work on both Minecraft Bedrock and Java editions.

How To Reach the Bedrock Layer in Minecraft?

The easiest way to actually reach the Bedrock is by straight up digging downwards. Thanks to the best dripstone caves in Minecraft, it has become a whole lot easier to reach in there. But, that isn’t exactly the sole location where Bedrock exists. The supposedly unreachable roof of the Nether dimension can also be crossed. We’ll show you how:

1. Go and Make A Nether Portal in Minecraft so that you can reach the Nether dimension.

2. Now, place the blocks right under your spawn point.

3. Place the ladders which would further lead up to the Bedrock block.

4. Now you have to climb the ladder.

How To Break Bedrock in Minecraft 1.18.1

Till date, this is supposedly the only working method in Minecraft 1.18.1 These have been tested personally on the Minecraft Java edition, so it should definitely work perfectly as long as your timing manages to be just right.

But, before we move ahead, let’s check out the list of the materials you would need to break the Bedrock in Minecraft.

So, let’s collect the necessary resources and go ahead with the necessary steps to Break Bedrock in Minecraft.

Materials Required To Break Bedrock in Minecraft

If you want to break the Bedrock in Minecraft 1.18.1, you would be required to collect the given materials:

In case you aren’t used to Redstone-based recipes, all these materials might seem a tad bit new to you. But, don’t worry, it’s pretty easy to find. Obsidian blocks can be mined by a diamond pickaxe at whichever location which has merging water and even lava sources.

Buckets of lava and water can be utilized if you wanna make obsidian blocks. Now let’s further go ahead with the steps for the crafting recipe.

How Can You Use Piston To Break Bedrock in Minecraft 1.18.1

The Setup for this Method:

Now, with every item with you, you just have to reach for the Bedrock layer before you start. So let’s see how we can do that:

1. Place a piston over a Bedrock block of your choice.

2. Put a TNT Block right on top of it and put Obsidian blocks on both sides.

3. Put another block right on top of the obsidian block.

4. Place a TNT Block right on top of that block.

5. At last, put the trap door right on the top half of the obsidian block.

6. Place the lever right on the block.

Further, we would have to exploit Piston’s Obsidian Breaking Glitch.

Now that our setup is finally ready, it is officially time that you break the Bedrock in Minecraft 1.18.1 Your aim should be to utilize the lever which would further activate the TNT and piston right at the exact same time.

As soon as the TNT finally destroys the piston, you would have to replace it with another piston which would automatically glitch out the Obsidian block.

Let’s further check out how it exactly works:

Steps to Break the Bedrock in Minecraft 1.18.1

1. Hold a piston right in your hand.

2. Pull the lever which would automatically activate the TNT blocks. (Keep it in mind that you would have only 3 seconds to act)

3. You have to aim at the top corner of the obsidian block.

4. As long as you did everything according to the steps, you’ll see the piston placed facing upwards.

Wrapping Up

Now, whether the aim is to access the void or even build something on top of the Nether roof, you now officially know how to Break Bedrock in Minecraft. But, do remember that you would not be able to straight up collect the broken Bedrock blocks, but you do have the option to replace them with a different block.

A lot of methods have been found by Minecraft enthusiasts but till date, only one method has managed to survive the in-game patches.

We hope that we managed to correctly guide you on How To Break Bedrock in Minecraft.

How to break bedrock in survival in Minecraft (Ancient way)

Bedrock is breakable in survival, but you can’t get it as an item. The way to break it is more of a glitch in the programming, because technically it’s not supposed to be breakable. It doesn’t require many materials to break it.

Materials you will need to break bedrock:
4 Dark oak saplings
15 Bone meal (amount varies but 15 is a good amount to bring to be sure you have enough)
4 blocks of dirt

What you should bring on the journey and to do the process:
The materials listed above (You will need those)
6 pickaxes (Digging down and clearing an area)
4 shovels (Digging down and clearing an area)
Flint and steel (For burning the tree)
axe (For breaking the tree)
Sword and armor (In case you encounter monsters)
Food (don’t want to starve while down there)

Step 1
Get to bedrock
Bring a few pickaxes and shovels and dig down to the bedrock layer with the materials for breaking bedrock in your inventory.

Step 2
Clear an area
You’ll have to clear an 8×8 square area by destroying all the the blocks around it. You will also have to dig out the blocks on the roof of the 8×8 square about 10 blocks high (If it doesn’t work with 10, dig a bit higher). (This is why you need multiple pickaxes and shovels.)

Step 3
Break the bedrock
In the center 4×4 area in the 8×8 space you cleared, place the 4 dirt blocks. On top of those 4 dirt blocks, place all 4 saplings. *Make sure the saplings are dark oak. Then use bone meal on one of the sapling until it grows into a tree.

Step 4
Find the broken bedrock
All you have to do is dig through the bottom of the tree and below the 4×4 are where you placed the dirt, 1 or 2 pieces of bedrock will be broken. (If for some reason none are broken, one thing you can do is light the tree on fire until it burns away and you can try again. Or you can just bring an axe and chop it away.)

nok-ko/bedrock-breaking

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

A Fabric mod that allows Bedrock to be broken. Much configuration!

This mod has 2 non-loader dependencies (Fabric Language Kotlin and the Fabric API), and ships with a copy of ParadoxConfig.

Defaults:

By default, a Bedrock Pickaxe item is added (without a crafting recipe or creative tab, ID: «bedrockpickaxe:bedrock_pickaxe» ).

To remove it, set:

Difficulty of breaking Bedrock is configurable, based on Minecraft hardness values:

Any item can be made to break bedrock:

If items other than the Bedrock Pickaxe are selected, you may want to set:

Otherwise, everything that isn’t a Bedrock Pickaxe will be “ineffective” on Bedrock, and mine at 30% the speed.

The Efficiency enchantment works properly. The Fortune enchantment will not work.

This mod is released under the CC0 license. Nokko made it.

This is the first mod I made for Fabric 1.16.4! Mixins are awesome.

To people looking at this code for reference:

About

A Fabric mod for Minecraft that allows you to break bedrock.