How to breed villagers

How to breed villagers

How to breed Villagers in Minecraft

Breeding villagers in Minecraft, updated to version 1.19.

How to breed villagers. Смотреть фото How to breed villagers. Смотреть картинку How to breed villagers. Картинка про How to breed villagers. Фото How to breed villagers

Our Minecraft Villager Breeding Guide feature how to breed villagers to increase the population of your nearby villages! We’re going through all of the breeding requirements you’ll need to follow. This guide has also been updated to work with the most current 1.19 Minecraft release.

Maybe you’ve caused one too many problems with the local village and negative gossip is spreading about you. Perhaps you have dreams of a more Orwellian nature. No matter how you got here, what you want is lots and lots of villagers. In this guide, you’ll find everything you need to know about breeding villagers, including how it was changed in Version 1.14 and the following pre-releases. For just that part, you can skip to the “Changes in 1.14” section down below. If you’re new to breeding villagers, read on!

Finding Villagers to breed in Minecraft

The easiest way to find a Villager is to look for a village! These collections of buildings appear scattered throughout the world and will look different depending on the local climate. Be cautious when approaching a new location. The Village and Pillage update has added some new inhabitants to the Minecraft overworld, and many of them won’t be happy to see you. These unhappy villagers include:

In every village, you can find blocks like the Fletching Table, the Lectern, the Barrel, and more that act as “job sites” for Villagers. Any nearby Villager can claim one of these job sites and start offering relevant trades to the player. For example, the Lectern is the job site for the Librarian, who will buy paper from you if you talk to them. There’s a lot to learn when it comes to trading with Villagers, but to get started, just talk to each Villager and see what kind of trades they can offer.

The basics of Villager breeding in Minecraft

When you first get to a village, you may already see some big-headed babies running around! Baby villagers take 20 real-world minutes to grow up, and once they’re fully grown, they’ll latch onto any unattended job site and start offering trades. Unlike other mobs in Minecraft, villagers can’t be bred on command just by feeding them a specific item. Instead, they plan out their families, deciding to breed on their own if the two main requirements are met.

First, both parents need to have a nice meal. Villagers actually have eight hidden inventory slots (for a total of 12 slots) where they can store food and seeds, and each parent will need to fill up one of those slots with one of the following:

In total, Villagers must hold 12 individual slots of food. Potatoes and carrots each account for one individual slot, which is why you need 12 of those vegetables in total. Loaves of bread, however, account for four slots per loaf, which is why you only need three loaves of bread in total.

Villagers will share food with each other when they have extra, and you can help out by throwing food to hungry Villagers. Once two Villagers are ready to breed, they will wait until the evening of that day. Then, if all requirements are met, they will consume the required food in the process, quickly popping out a new baby villager within about 20 minutes.

Changes in Minecraft version 1.14

These changes may have debuted in 1.14, but they’re still working with the latest version release. The biggest change from previous versions is that Villagers now determine their willingness to breed based on the number of nearby beds rather than the number of nearby doors. Previously, the strategy for turning villages into cities was to pack tiny rooms in like sardines, with a wooden door for each resident.

Now, the Villagers have developed some standards of living. In order for two Villagers to have a child, there must be one bed for each of them to sleep in, plus one for the child. This means that big rooms with lots of beds and a steady food source are the new magic formula for pumping out Villager babies.

The rooms must be big enough that the beds have at least two empty blocks of space above them. This will give room for the new baby Villager to jump on the bed. Remember, you need three beds lined next to each other in total to breed the child.

Exceeding the Limits

The biggest issue with breeding Villagers is that any village will eventually stop growing once there are no more unoccupied beds available for a new baby. This issue is best solved by sending the newborn Villagers a long distance away from their original bed. You could use an automatic minecart system or waterway for this. And before you say it would be too cruel to do so, rest assured that the little ones will forget all about their old village less than 10 seconds after they get 36 blocks away.

This will both solve your overpopulation issue and provide a convenient way to transport Villagers to their new homes. To keep your Villager factory running at full capacity, consider using dispensers or an automatic harvester to keep a steady supply of food items available.

Looking for more Minecraft content on Pro Game Guides? Check out Best Minecraft Adventure Maps 1.18 (July 2022).

Minecraft: How to Breed Villagers (Version 1.19)

Here’s everything you need to know on breeding Villagers in Minecraft 1.19!

Home » Guides » Minecraft: How to Breed Villagers (Version 1.19)

Breeding villagers in Minecraft was a tad easier in past versions of the game, but today, only a few more steps are needed to give yourself a squad of the helpful traders. Here’s how to breed villagers in Minecraft Version 1.19.

Breeding villagers is an odd thing to think about doing. Villagers are people and using the word breeding with them makes it seem like they’re animals.

How to Breed Villagers in Minecraft Version 1.19

In the instance of Minecraft, they kind of are though. The more Villagers your village has, the more trades opened up meaning the more your village, farm, town or even city, prospers.

Before diving into how to make Villagers do their thing to create a baby, let’s talk about Minecraft Version 1.19.

What Minecraft Version 1.19 Is

If you don’t keep up with Minecraft, it’s important to know that the game receives large updates, as well as smaller interstitial updates in between those larger ones.

These updates add new content to the game, fix bugs and generally make the game a better experience. The latest and largest update to Minecraft was Version 1.19, which was released on June 7 of this year.

Version 1.19, otherwise known as ‘The Wild’ update, introduced the Deep Dark and Mangrove Swamp biomes, mobs like Wardens, Frogs and Allays, as well as new materials like Reinforced Deepslate. It even added Ancient Cities found in the Deep Dark biome which are well worth seeking out.

Who Villagers Are

Villagers are just that — NPC mobs that live in small and quaint villages. They have lives, families, jobs, trades and a system completely separate from you, the player, although you can interact with them and affect how they work in the game.

How to Breed Villagers

To breed Villagers in Minecraft Version 1.19, you first need to find a village or build one and have three bread, 12 carrots, or 12 potatoes.

Villages are never too far away so with enough exploration, you’ll come across one. You can also build one by building a few buildings close to each other.

With buildings created, ensure that there is at least one door on each building so Villagers can walk in. Inside of your buildings, you need to have three beds. One for each of the Villagers you will breed and a third bed for the baby that will be born.

With the beds and building prepared, you need to make them willing to breed, which oddly enough requires a strange food requirement.

To breed, Minecraft Villagers must have three bread, 12 carrots, 12 beetroots or 12 potatoes in their inventory.

Lure two Villagers who meet this food requirement into one of the buildings with three beds and exit the building. In roughly 20 minutes, you should find that your Villagers have created a baby.

In another 20 minutes, that baby will grow into a standard Villager.

How to Assign Baby Villagers to a Job

Once a baby Villager has grown into an adult, if there’s a job block nearby, it’ll automatically claim it and become that profession. You can check out our complete guide on how to change Villager jobs in Minecraft if you need a full breakdown of all job blocks and their associated trades and professions.

It’s worth noting that if your baby Villager has green clothing, it’s deemed a Nitwit and cannot claim any job.

That’s it for our guide on how to breed Villagers in Minecraft Version 1.19, including what Minecraft Version 1.19 is and who Villagers are.

For more information about Mojang’s blocky creative game, be sure to search for Minecraft on Twinfinite. We also have news, previews, reviews, features, quizzes and of course, guides, for all of your other favorite games too.

How to Breed Villagers in Minecraft

How to breed villagers. Смотреть фото How to breed villagers. Смотреть картинку How to breed villagers. Картинка про How to breed villagers. Фото How to breed villagers

«> Villagers/Minecraft Game Screenshot

In Minecraft, there are so many different types of animals you can breed. You can breed cows, pigs, wolves, and even chickens. Another mob that can be bred is a villager.

Villagers are great in Minecraft. You can use them to create a source of Emeralds for your base or even create an efficient Iron Golem farm for infinite iron in your world. In this tutorial, we will teach you the basics of how to breed villagers.

To read more about villagers click here.

Contents

How to Breed Villagers in Minecraft?

Here’s how to breed villagers in Minecraft:

In a Nutshell:

To breed villagers in Minecraft, find two villagers you want to breed, you need to get them in a room alone together in the presence of beds. Then acquire enough food to give to the villagers. When you throw the food on the ground near the villagers, their “willingness” to breed will increase.

Required Materials to Breed Villagers in Minecraft

Step-by-Step Guide(with Pictures):

Here is the step-by-step pictorial guide you need to follow to breed villagers in Minecraft:

Step 1: Locate a Village

The first step to breeding villagers in Minecraft is to find a village. You need villagers before you can start breeding them. Once you have found a village, and in turn found the two villagers you want to breed, you need to get them in a room alone together.

Step 2: Place enough Beds

For this to work, there are only a few things to keep in mind. The first is that there have to be at least 3 beds in the room that you have trapped your villagers in. Depending on how many villagers you want to be bred, that is the number of beds you need in your room. The villagers will want to fill all of the beds in the room. This means that the more beds you have, the more your villagers will breed.

For the beds in your breeding room, there needs to be a two-block height above the beds. This is so that the villagers have enough room to get on and off of the bed without suffocating and for the bed to count. Be sure to check for any half slabs or stairs that could prevent the willingness of villagers.

Now that you have your two villagers in the same room together, if they are “willing,” the villagers will breed. This will only happen as long as there are unclaimed beds in the room.

Step 3: Give Villagers Food

Once villagers have appropriate space, and more beds than there are villagers, they will begin to breed as long as they have enough food in their inventory. You can use bread, beets, carrots, potatoes, and other crops.

And after a short amount of time, a baby will appear and claim its bed. You can repeat this process as many times as you would like, as long as you have unclaimed beds in the area.

How to Breed Villagers Automatically in Minecraft?

One good way to automate the villager breeding process is with Gardens. If you get villagers in a garden, they will automatically harvest the crops and place them in their inventory. Villagers have their own inventories and this is how they get more “willingness” to breed.

All you have to do in this situation is to create a garden in the area where the villagers are and plant some seeds. If you have any extra unclaimed beds, the villagers will take care of the rest of the work and breed themselves until all of the unclaimed beds are claimed. Adding additional beds will increase the potential size of your village.

How to Breed Villagers Manually in Minecraft?

Breeding villagers by throwing food is the easiest way to breed villagers. All you need to do is acquire enough food to give to the villagers. When you throw the food on the ground near the villagers, they will run over and try to pick up the food. Once they have enough food in their inventory, their “willingness” to breed will increase.

Villagers become willing by either having 12 carrots, 12 potatoes, 12 beetroots, or 3 bread in their inventory. Remember, each villager must have at least one of these four types of food (along with the right amount) in their inventory in order to breed.

How to Breed Villagers through Trading in Minecraft?

When a villager is found, the only way to allow it to begin breeding is by its “willingness.” Now that you know how to increase its “willingness,” you need to know how to unlock it. Doing this is fairly simple though. If the villager has a new trade that you have not completed before, it is a 100% chance that the “willingness” of the villager will unlock. If it is a trade that you have already completed once before, it is a 20% chance. You can use this as a way to increase the chances of your villagers taking the food in their inventories and breeding.

Changes to Villager Breeding

Originally, the max population of villagers was limited by the number of doors in the village. However, since the Village and Pillage update, the population of a village is now set by the number of beds.

How to Select a Baby Villager’s Profession

If there is an unclaimed job block nearby, the baby villager will claim it as a new profession as soon as it grows up. There is an exception with villagers with green robes, these villagers are known as nitwits. Nitwits cannot be given a profession. As long as a trade is not conducted with the new villager, you can still remove its claimed job block and replace it with another to change its profession.

How to Breed Villagers in Minecraft

Say you’ve already created your starter base in Minecraft, but you want to learn more. Villages in Minecraft are inhabited, and you can grow the population by breeding villagers. This enhances trading in the game while making the vast world of Minecraft a little less lonely. If you’re confused about how to breed villagers in the game, we’re here to help.

In this guide, we will explain how to breed villagers in different versions of Minecraft, and how to protect them from zombies. Additionally, we will answer some of the most common questions related to village inhabitants and breeding in the game.

How to Breed Villagers in Minecraft Version 1.14 and Earlier?

To breed villagers in Minecraft 1.14 or earlier, follow the steps below:

How to breed villagers. Смотреть фото How to breed villagers. Смотреть картинку How to breed villagers. Картинка про How to breed villagers. Фото How to breed villagers

Tip: Be aware of new villages – they may be inhabited by zombies, pillagers, vindicators, evokers, or illusioners.

How to Breed Villagers in Minecraft Version 1.16?

With the new version of the game, the villager breeding process has changed slightly. Follow the instructions below to grow your village population in Minecraft 1.16:

How to breed villagers. Смотреть фото How to breed villagers. Смотреть картинку How to breed villagers. Картинка про How to breed villagers. Фото How to breed villagers

Tip: Be aware of new villages – they may be inhabited by zombies, pillagers, vindicators, evokers, or illusioners.

How to Breed Villagers in Minecraft Bedrock?

Breeding villagers in Minecraft Bedrock isn’t much different from doing it in Minecraft 1.16. To do that, follow the steps below:

How to breed villagers. Смотреть фото How to breed villagers. Смотреть картинку How to breed villagers. Картинка про How to breed villagers. Фото How to breed villagers

Tip: if your village is full, you have to either build more houses or send newborn villagers away to another village to breed more. Don’t worry; newborn villagers grow up in about 20 minutes and quickly forget about their home.

How to Breed Villagers in Survival Mode?

Breeding villagers in Minecraft survival mode is the same as breeding them in the creative mode.

How to Make a Village Zombie-Proof in Minecraft?

If you’re playing in survival mode, your villagers can be killed by zombies, and you will have to breed more to replace them. If you don’t want to spend time breeding, ensure that your village is safe. Follow the steps below:

How to breed villagers. Смотреть фото How to breed villagers. Смотреть картинку How to breed villagers. Картинка про How to breed villagers. Фото How to breed villagers

Frequently Asked Questions

Read this section to find out more about village inhabitants and breeding in Minecraft.

What else can I breed other than Villagers?

Villagers aren’t the only species that can be bred in Minecraft. You can also breed pets, tamed animals, such as horses, donkeys, cows, and even bees! Every animal species has different breeding requirements. So, to breed horses, you need to feed them a golden apple or a golden carrot. Cows, goats, and sheep are willing to breed after eating wheat. Pigs will eat carrots, potatoes, and beetroot – same as villagers, though you only need one instead of 12.

Wolves will breed after eating most types of meat. Chickens want to be fed seeds, and cats – raw fish. You can also make baby animals grow faster by feeding them certain types of food. For example, sheep grow faster when eating grass, horses – when consuming sugar.

What good does it do to breed Villagers in Minecraft?

There are a couple of reasons to breed villagers in Minecraft. Firstly, you can trade with them. As every villager has a different profession, you’d want to have enough villagers to ensure a supply of all necessary goods.

Secondly, your villagers can die for various reasons, and you have to replace them. Thirdly, growing your village is simply fun, and when the village is large enough, iron golems spawn automatically to protect the inhabitants.

What professions can Villagers have in Minecraft?

Most of the villagers have professions and supply certain goods. They have a different appearance that helps to identify them. Armorers will trade various iron, chainmail, and diamond armor for emeralds. You can get emeralds and meat from butchers. Cartographers trade maps and banners for emeralds and compasses.

To get gemstones, visit a cleric villager. Fletchers will help you to get crafting and hunting tools. Other villager professions include farmers, fishermen, leatherworkers, librarians, shepherds, and more. Some villagers are unemployed – they look like a plain villager model without any additional details.

You can find them a job by building a new job site. Another non-trading villager type is Nitwit. They wear green coats and shake heads if you attempt to trade.

What’s Reputation in Minecraft?

Expand Your Village

Hopefully, with the help of our guide, you will easily grow the population of your village in Minecraft regardless of the game version. Make sure to protect your village inhabitants and create enough working sites for them to be willing to trade. And don’t forget about your reputation in the village – if it’s too low, you will be banished by the iron golems and will lose the ability to interact with villagers.

Do you prefer creating your own village or trading in existing villages in Minecraft? Share your opinions in the comments section below.

How to breed villagers in Minecraft and make your own town

Twitter LinkedIn icon The word «in».

LinkedIn Fliboard icon A stylized letter F.

Flipboard Facebook Icon The letter F.

Email Link icon An image of a chain link. It symobilizes a website link url.

Even in Survival mode, Minecraft gives you a tremendous amount of control over your world. You can grow forests, blow up mountains, enter new universes — there’s not much that you can’t do.

Your control extends to the game’s NPCs, too. If you want to make more villagers without wandering around to find a new village, you can breed the villagers together. This might sound strange, but it’s an efficient way to bump up a town’s population, or even make your own city.

Here’s how to breed villagers in Minecraft, either manually or with an automatic breeder.

How to breed villagers in Minecraft

If you just want a few new villagers, breeding them is a pretty quick process. Here’s what you’ll need:

1. Get your villagers close to each other. The best way to do this is to build a wall around them and trap them inside, or build a structure and move a villager into it using a boat.

Quick tip: You can get villagers into a boat by placing one in front of them, and letting them walk into it. Once a villager is in a boat, you can hop in and «sail» it across land or sea. Break the boat to free them.

2. Once your villagers are stuck in a small space, place beds around them. You need to have more beds than you have villagers, since the child they make will need a bed too. And any bed you place needs to have at least two blocks of free space above it.

3. Now you’ll need to increase the «willingness» of your villagers. Villagers will only breed once they’re «willing» enough, and you can increase a villager’s willingness by giving them food. Here’s how effective each type of food is:

Type of FoodAmount Needed to Make a Villager Willing
BreadThree
Carrot12
Potato12
Beetroot12

4. Give your villagers food — you can just throw it at them — until hearts appear above their heads. This means that they’re willing.

5. Wait. The next time two willing villagers bump into each other, they should stand together for a few moments and then spawn a baby villager between them.

You can continue this until you have as many villagers as you want — just remember that you need more beds than villagers. Baby villagers will «grow up» 20 minutes after they’re born.

Quick tip: You can create an «automatic» villager breeding system by introducing a farmer to the mix. Farmers will give any excess food they create to villagers, building their willingness to breed. At that point, all you need to do is place down beds, and your villagers will breed indefinitely.

Источники информации:

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *