How to connect phone to phone via wifi

Bluetooth tethering: How to share your phone’s Wi-Fi connection

I am sure you might have come across an option called ‘Bluetooth tethering’ while scrolling through the settings menu on your Android device. Ever wondered why and when you could possibly use this feature? Let us explain the whys and hows of Bluetooth tethering in this article.

Jump to

What is Bluetooth tethering?

Let us first start by addressing what the term Bluetooth tethering actually means. The feature, as you may have guessed, is quite similar to the Wi-Fi hotspot and USB tethering, where you can share the Internet connection used by the phone to be shared with any device that supports Bluetooth.

On older Android phones, the Bluetooth tethering feature only allowed sharing of mobile data with other devices. However, if you have a newer Android phone, you can actually use Bluetooth tethering to share (and extend) the range of your Wi-Fi connection to other devices.

When to use Bluetooth tethering?

As mentioned earlier, Bluetooth tethering is an objectively slower form of connectivity compared to traditional Wi-Fi hotspots. So why use it in the first place? Turns out, there are a couple of occasions when using Bluetooth tethering may actually make sense.

Learn how to make use of the Bluetooth tethering feature on Android smartphones. / © NextPit by Irina Efremova

When your phone does not support Wi-Fi sharing over Wi-Fi hotspot

As of 2021, many low-end and mid-range smartphones (still) do not allow a Wi-Fi connection and a Wi-Fi hotspot to be enabled simultaneously. This means you will not be able to use Wi-Fi Hotspot to share your internet connection with other devices. In such scenarios, you are left with no other option but to use Bluetooth tethering since this method of tethering works even if you are connected to a Wi-Fi network.

As to why anyone would want to do this, hear me out.

When you want to conserve battery

Let us now move to the part where we actually set up and use Bluetooth tethering to share your Wi-Fi connection. This process is actually really easy. Here’s how to do it.

How to share Wi-Fi over Bluetooth

Step 1: Turn on your phone’s Bluetooth

First, ensure that your phone is already connected to the Wi-Fi network at your home/office. Then, make sure you turn on Bluetooth from within the settings menu.

Step 2: Turn on Bluetooth tethering on your phone

Now that you’re certain that Bluetooth is enabled on your device:

Step 3: Pair your device via Bluetooth and receive connectivity

With this done, you can then use Bluetooth on your laptop or PC, tablet, or another device to connect to your phone and make use of its internet connection.

This is very straightforward with smartphones, but to connect a Windows PC, you have to go to Settings > Devices and printer, right-click the icon representing your phone, and select Connect using > Access point. Ta-Da! You’re ready to start browsing the internet.

After pairing the device, be sure to check its device profile to enable Internet access. / © NextPit

Did you find this useful? Have you managed to connect your phone’s internet connection with other devices? Tell us in the comments.

This article was updated in July 2021. Older comments were retained.

Question: How To Transfer Files From Pc To Android Phone Using Wifi?

As with any Android application, WiFi File Transfer can be installed with these simple steps:

How do I transfer files from PC to Android phone?

Move files by USB

How can I share files from PC to mobile via WiFi?

You can achieve it by either connecting them to a router or opening the hotspot of your phone and link the computer to the produced wireless network.

How do I transfer photos from Android phone to PC via WiFi?

How to Transfer Android Images to Computer

How can I share files between Android and PC?

Share files between your Android Phone and your PC

How do I transfer files from PC to Android phone wirelessly?

Transfer data wirelessly to your Android device

How do I enable file transfer on Android?

Move files by USB

How can I transfer files from PC to mobile via FTP?

Transfer Files From Redmi Devices to PC Using FTP

How can I transfer files from PC to PC via WiFi?

5 Answers

How do I transfer files from my Android to my computer wirelessly?

As with any Android application, WiFi File Transfer can be installed with these simple steps:

How do I connect my phone to my computer via WiFi?

It’s easy to do. Connect the USB cable that shipped with your phone to your computer, then plug it into the phone’s USB port. Next, on your Android device, open Settings > Network & internet > Hotspot & tethering. Tap the USB tethering option.

How do I transfer files between Android phones?

Steps

How do I transfer photos from Android phone to Windows 10?

Make sure your Android device is in MTP transfer mode. After successful connection, you will see Phone Companion interface and then choose “Import photos and videos into the Photos app” option. Once you click the stock, Photos app for Windows 10 will open and then you can see the messages presented.

How can I share files from mobile to PC?

The computer and phone are now linked. Select the files that you’d like to transfer from your Android device and hit “Copy to PC” in Droid Transfer. To add files from your PC to your Android device, click on Add File in Droid Transfer and choose a file on your PC you wish to add to your device.

How do I use WIFI Direct on Windows 10?

How to disable Wi-Fi Sense in Windows 10

How do I transfer pictures from my computer to my android?

Method 2 Using a USB Cable for Android on Windows

How do I use WIFI Direct?

How to Use Wifi Direct?

How do I download pictures to my computer from my Samsung phone?

Connect the device to a computer using the supplied USB cable.

How do I sync my android phone with my laptop?

How to sync an Android phone to a computer

How do I unlock my Android phone for file transfer?

So find another USB cable, connect your Android phone or tablet to Mac with the new cable and if Android File Transfer can find your device this time.

Choose File Transfers on Android

What do I do if Android File Transfer is not working?

Step 2: Connect your Android phone to Mac via USB data cable. Step 3 :On your Android Phone, tap on “Settings” by swiping down from the top of the screen. Step 4: Turn on USB Debugging and choose “Media device (MTP)” option. If not, then it’s time to troubleshoot your Mac computer.

Does Android File Transfer work?

There are various reasons why your Android device is not able to transfer data. Though Android File Transfer is an effective application for transferring data, the restrictions limit the activities. Mac doesn’t support media transfer protocol (MTP) for transferring files from Android to Mac.

How can I access my Android files from PC?

Method 1 Using the USB Cable

How do I transfer files between laptops?

Solution 1. Transfer Files Between Two Laptops Using File Transfer Software

How do I transfer music from my computer to my Android phone using USB?

Load music onto your device using a USB cable

How do I transfer everything from my old Android to my new Android?

Transfer your data between Android devices

How can I transfer large files between Android phones?

Transfer Large Files Between iOS and Android Devices

How do I transfer files between Android phones using Bluetooth?

From Android to desktop

How do I transfer pictures from my Android phone to my computer wirelessly?

How to Transfer Android Images to Computer

How do I transfer photos from my computer to my Android phone using USB?

Move files by USB

How do I transfer pictures from my s9 to my computer?

Follow the steps below:

Подключение телефона к роутеру через Wi-Fi

Сначала стоит отметить, что перед организацией подключения нужно убедиться в правильности настройки маршрутизатора, а также знать ключ безопасности беспроводной сети либо подготовиться к использованию технологии WPS. Если вы только приобрели сетевое оборудование и даже не подсоединили его к проводу от провайдера, сейчас самое время сделать это, а за помощью обращайтесь к отдельным статьям на нашем сайте, воспользовавшись полем поиска вверху страницы.

Способ 1: Раздел «Wi-Fi» в меню смартфона

Самый простой и знакомый многим вариант — использование специального меню в операционной системе смартфона для подключения к беспроводной сети маршрутизатора. Для этого потребуется выполнить всего несколько простых действий.

Сразу же после нажатия по кнопке подключения начнется процесс аутентификации, еще через несколько секунд можно будет перейти к использованию интернета, если пароль был введен правильно, а также есть доступ к сети от провайдера.

Способ 2: Кнопка WPS

Технология под названием WPS сейчас встроена во все актуальные модели роутеров и по умолчанию включена. Ее предназначение заключается в организации быстрого соединения с беспроводной сетью без использования пароля, но для этого придется нажать специальную кнопку на маршрутизаторе. Если вы еще не знакомы с данным инструментом и желаете узнать все о его настройке, ознакомьтесь с отдельной инструкцией на нашем сайте по ссылке ниже.

В том случае, когда смартфон поддерживает подобное соединение, снизу от названия сети должна быть надпись «Доступно WPS». Это значит, что вы можете выбрать сеть и перейти к дальнейшему действию.

Оно заключается в нажатии по той самой кнопке на роутере, но учитывайте, что не нужно зажимать ее, поскольку часто она настроена и на сброс конфигурации, который запускается длительным удержанием кнопки. Нажмите один раз и убедитесь в том, что смартфон подключился к сети.

В некоторых версиях мобильных операционных систем технология WPS работает иначе, поэтому описанный выше метод не сработает. Тогда потребуется открыть настройки Wi-Fi, выбрать там раздел «Кнопка WPS», а затем нажать ее на маршрутизаторе и дождаться успешного подключения.

Способ 3: Веб-интерфейс маршрутизатора

Последний вариант, о котором пойдет речь, тоже связан с технологией WPS, но будет полезен в тех ситуациях, когда активировать ее нажатием на кнопку не получается или попросту неудобно. Это же действие можно выполнить через веб-интерфейс сетевого оборудования, где сначала нужно авторизоваться.

После успешного входа остается только следовать инструкции ниже, которая разобрана примере последней версии прошивки TP-Link.

How to connect to a Wi-Fi network on your Android phone or tablet, and disconnect when you’re done

Twitter LinkedIn icon The word «in».

LinkedIn Fliboard icon A stylized letter F.

Flipboard Facebook Icon The letter F.

Email Link icon An image of a chain link. It symobilizes a website link url.

If you have a cap on how much mobile data you can use, you should know how to connect your Android phone to a Wi-Fi network. Using Wi-Fi won’t cost you anything, won’t count towards your data cap, and will often give you faster internet speeds.

Connecting your Android phone or tablet to Wi-Fi is a quick and easy process. And once your Android knows a network, it will store that network’s password and automatically reconnect whenever you’re in range.

Here’s how to connect.

Check out the products mentioned in this article:

How to connect to Wi-Fi on an Android device

1. Open your Android’s Settings app by swiping up from the bottom of the screen and selecting it.

2. Tap the word «Connections.»

3. In the new menu, tap «Wi-Fi» and then look under the «Available Networks» heading.

4. Select the Wi-Fi network that you want by tapping it. If it’s locked, enter its password, and then tap «Connect.»

If you’re trying to connect to the Wi-Fi at certain public locations — this includes sports arenas, airports, libraries, and more — you may need to also agree to the network’s terms and conditions. You can usually do this by opening your internet browser and trying to load a new page, where you’ll be automatically redirected to the Wi-Fi network’s login page.

To disconnect from a Wi-Fi network, tap the name of the network you’re currently connected to from the screen depicted above and tap «Forget.»

How to Connect an Android to a PC

Corded and wireless options to connecting your phone to your computer

What to Know

This article explains how to connect an Android to a PC by using a USB cable or a wireless connection via AirDroid, Bluetooth, or the Microsoft Your Phone app.

How to Connect an Android to a PC

If you want to connect an Android to a PC, there are several options. The most common approach is to use a USB cable, but there are a number of wireless solutions that’ll work just as well, and often offer a faster connection.

Most Android devices come with a USB charging cable, with the charger end connected via the USB end of the wire. If you unplug the USB end from the charger, you can plug that end into your PC to initiate a connection with your computer.

However, if you don’t have your USB cable with you, or prefer a wireless solution, these are the ways you can connect an Android to a PC without a cable:

Connect an Android to a PC With USB

Using a USB cable to connect your Android to your PC is easy, but it only allows you to transfer files back and forth. You can’t remotely control your Android using this connection.

First, connect the micro-USB end of the cable to your phone, and the USB end to your computer.

When you connect your Android to your PC via the USB cable, you’ll see a USB connection notification in your Android notifications area. Tap the notification, then tap Transfer files.

On your computer, you’ll see a notification asking what you’d like to do with the new USB device. Select this notification.

This will open a window to select how you’d like to use the device. Select Open device to view files.

Now, when you open Windows Explorer, select This PC and you’ll see your device available. Select the device to expand it and browse through all of the folders and files on your phone.

Connect an Android to a PC With AirDroid

AirDroid is an impressive app because it allows you to not only transfer files to and from your Android, but it also includes a number of remote control features.

Install AirDroid from Google Play onto your Android device.

Open the app and enable the features you plan to use. You may need to create a new AirDroid account if this is the first time you’re using the app.

Some features, such as remotely controlling your Android screen, requires root access to the device. Additionally, some features are disabled unless you purchase the Premium plan.

Visit AirDroid Web, and log into the same account you created above.

Once you connect, you’ll see the main dashboard. On the right, you’ll see a toolbox with a summary of information about your phone storage. On the left, you’ll see all of the apps that let you control your phone.

Select the Files app to browse files on your phone and transfer files back and forth.

Select the Messages app to review stored messages on your phone or to launch a new SMS session with anyone in your contacts list.

You can even use the Camera app to remotely view and control the camera on your Android phone.

Connect an Android to a PC With Bluetooth

If you only need a connection to transfer files, bluetooth is an excellent option because it requires no wires and the transfers are fast and easy.

Make sure bluetooth is turned on for both your Android device and your computer. When it is, you’ll see the computer show up on your Android as an available device to pair with.

Tap this device to pair with it. You should see a pair code appear on both the PC and on your android device. Tap Pair to complete the connection.

Once connected, on your PC right-click the bluetooth icon on the right side of the taskbar, then select either Send a File or Receive a File.

Next, browse to the file on your PC that you want to transfer and select Next.

This will initiate the file transfer from your PC to your Android.

Connect an Android to a PC With Microsoft Your Phone

Another convenient cloud bases service that’ll let you access your phone’s files, texts, and notifications is a new service provided by Microsoft called Your Phone.

The Your Phone app is ideal for those situations when you’ve forgotten your phone at home. From your laptop, you can still see all messages and notifications you might have otherwise missed.

Install the Microsoft Your Phone app from Google Play onto your Android. You’ll need to accept all of the requested security permissions.

Install the Your Phone app from the Microsoft Store onto your Windows 10 PC.

Launch the Your Phone app on your computer and select Android as the phone type that you want to connect to. Then select Get started.

Your computer will connect to your Android phone. Select Photos from the left panel to view all photos on your phone.

Select Messages to view messages, or send and receive new messages, from your computer through your Android phone.

Select Notifications to view all recent notifications on your Android phone.