How to reboot to safe mode

How to directly reboot in Safe Mode in Windows 11/10

The Safe mode in Windows, start the computer with a limited set of drivers and system files. Startup programs, add-ons, etc. first, do not run in Safe Mode, and only the basic drivers needed to start Windows 11/10/8/7 are started. This mode is quite useful for troubleshooting Windows problems.

If you want to restart and boot directly into Safe Mode, you have to watch the computer reboot, watch the various BIOS messages, select which operating system you want to boot with, and then press F8 at the exact moment to enable the Advanced Boot menu. In Windows 11/10, of course, things are a bit different. You have to first enable the F8 key if you want to use it to boot in Safe Mode.

How to reboot in Safe Mode

But you wish you can directly reboot into Safe Mode. To do this, open Run box, type msconfig and hit Enter to open the System Configuration utility.

Select the Boot tab, and under Boot Options, check Safe Mode. The Minimal option will get selected automatically. If you need other Safe Mode options like Networking, etc., you can select those.

Click on Apply > OK. You will now see a prompt. Click on the Restart button, and the computer will initiate the process to reboot your computer directly in safe mode. So before you click the Restart button, make sure that you have saved all your work.

Do note that, if you reboot again from Safe Mode, you will again reboot back into Safe Mode. So once you have completed your work in Safe Mode, again run msconfig and uncheck the Safe Boot option, Click Apply, and then restart your computer. This will bring you back to your desktop, after the restart.

Boot in Safe Mode using Command Prompt

You can execute the following command in an elevated command prompt, and restart your computer to boot into Safe Mode.

Boot into Safe Mode with Networking

Boot into Safe Mode with Command Prompt

To exit Safe Mode, use:

Shortcut to reboot in Safe Mode

If you need to reboot in Safe Mode frequently, you can create its shortcut. Right-click on your desktop, select New > Shortcut. In the Location field, copy-paste the following path:

Click next and name the shortcut as, say, Restart Options.

BootSafe

However, when you want to leave Safe Mode and return to Normal mode, you need to use this program again to get a reboot into Normal mode.

These links too are sure to interest you:

Start your PC in safe mode in Windows

Safe mode starts Windows in a basic state, using a limited set of files and drivers. If a problem doesn’t happen in safe mode, this means that default settings and basic device drivers aren’t causing the issue. Observing Windows in safe mode enables you to narrow down the source of a problem, and can help you troubleshoot problems on your PC.

There are two versions of safe mode: Safe Mode and Safe Mode with Networking. Safe Mode with Networking adds the network drivers and services you’ll need to access the internet and other computers on your network.

Select from the following sections to find out how to start your PC in safe mode from Settings, from the sign-in screen, or from a black or blank screen.

Under Recovery options, next to Advanced startup, select Restart now.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you’ll need to use the internet, select 5 or press F5 for Safe Mode with Networking.

When you can’t open Settings to get into safe mode, restart your device from the Windows sign-in screen.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

After your PC restarts, you’ll see a list of options. Select 4 or F4 to start your PC in safe mode. Or if you’ll need to use the internet, select 5 or F5 for Safe Mode with Networking.

Note: If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

Before you enter safe mode, you need to enter the Windows Recovery Environment (winRE). To do this, you will repeatedly turn your device off, then on:

Hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

When Windows restarts, hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

Allow your device to restart into Automatic Repair, and select Advanced options to enter winRE.

Now that you are in winRE, you will follow these steps to take you to safe mode:

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

After your device restarts, you’ll see a list of options. Select option 5 from the list or press F5 for Safe Mode with Networking.

If you need more info on a black or blank screen error, see Troubleshoot black or blank screen errors.

Notes: Restarting your device should be sufficient to exit you from Safe Mode back into normal mode. However, if for some reason your machine is still booting into Safe Mode on its own after restarting, try this:

Press the Windows logo key + R.

Type msconfig in the Open box and then select OK.

Select the Boot tab.

Press Windows logo key + I on your keyboard to open Settings. If that doesn’t work, select the Start button, then select Settings .

Under Advanced startup, select Restart now.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you’ll need to use the internet, select 5 or press F5 for Safe Mode with Networking.

When you can’t open Settings to get into safe mode, restart your device from the Windows sign-in screen.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

After your PC restarts, you’ll see a list of options. Select 4 or F4 to start your PC in safe mode. Or if you’ll need to use the internet, select 5 or F5 for Safe Mode with Networking.

Note: If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

Before you enter safe mode, you need to enter the Windows Recovery Environment (winRE). To do this, you will repeatedly turn your device off, then on:

Hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

When Windows restarts, hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

Allow your device to fully restart. You will enter winRE.

Now that you are in winRE, you will follow these steps to take you to safe mode:

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

After your device restarts, you’ll see a list of options. Select option 5 from the list or press F5 for Safe Mode with Networking.

If you need more info on a black or blank screen error, see Troubleshoot black or blank screen errors.

Notes: Restarting your device should be sufficient to exit you from Safe Mode back into normal mode. However, if for some reason your machine is still booting into Safe Mode on its own after restarting, try this:

Press the Windows logo key + R.

Type msconfig in the Open box and then select OK.

Select the Boot tab.

How to start Windows 10 in Safe Mode – 4 different methods (with screenshots)

Last Updated: 6 days ago

Safe Mode is a way to run Windows in its most basic form. It uses only absolutely essential files and drivers.

For example, in Safe Mode, your screen will display only 16 colors and a very low resolution, and you won’t be able to print documents or hear audio. It also won’t load many programs in the background.

Safe Mode is designed to help you troubleshoot computer problems.

Sometimes Windows 10 will automatically start in Safe Mode (e.g. if it has a problem loading normally). But sometimes you’ll need to start it in Safe Mode manually (e.g. if you get a blue screen error every time you start Windows).

This article explains how to manually start Windows 10 in safe mode.

4 ways to start Windows 10 in Safe Mode

Method 1: Start Safe Mode by pressing F8 at startup

First, you have to enable the F8 key method

On Windows 7, you could press the F8 key as your computer was booting to access the Advanced Boot Options menu. From there, you could access Safe Mode.

But on Windows 10, the F8 key method doesn’t work by default. You have to manually enable it.

Here’s how to get the F8 key to start Safe Mode in Windows 10:

1) Click the Windows start menu and type cmd, then click Run as administrator:

2) Copy this command:

bcdedit /set bootmenupolicy legacy

3) Paste the copied command into the Command Prompt (right-click in the Command Prompt to paste), then press the Enter key on your keyboard.

4) Reboot your PC.

Now you can start Safe Mode using the F8 key

Now that you’ve enabled the F8 method, you can use it to start Safe Mode:

1) Ensure your computer is turned off.

2) Turn your computer on.

3) Before anything appears on your screen, press F8 repeatedly until the Boot Options menu below displays. Then select Safe Mode.

If the Boot Options menu above doesn’t display, and instead Windows just launches normally, it’s likely that you didn’t press F8 early enough.

Method 2: Start Safe Mode by turning off your PC 3 times

If you’re unable to launch Windows, and you haven’t enabled the F8 method above, this is how to start Safe Mode:

1) Ensure your computer is off.

2) Press the power button to turn on your PC, and when you see the small spinning circle of dots that indicates Windows is starting, press and hold the power button until your PC shuts down. You’ll have to hold it for 4-5 seconds.

Do this again, and then again. After you’ve done it 3 times, start your computer again and let it run. It should now go into Automatic Repair mode:

3) Wait for Windows to diagnose your PC:

4) Click Advanced Options:

5) Click Troubleshoot:

6) Click Advanced options:

7) Click Startup Settings:

8) Click Restart.

Your computer will restart and present a list of different startup options.

9) On your keyboard, press the number 4 key to enter Safe Mode without internet access or the number 5 key to enter Safe Mode with internet access:

Method 3: Start Safe Mode using the System Configuration tool

If you’re able to launch Windows normally, you can boot into Safe Mode using the System Configuration tool:

1) Click the Windows start menu and type msconfig, then click Open:

2) Select the Boot tab, then check Safe boot and click OK.

3) When you’re prompted to restart your computer to apply these changes, click Restart and you’ll boot into Safe Mode.

To turn off Safe Mode and go back to normal mode

When you want to return Windows to normal mode, you just have to undo your changes:

1) Click the Windows start menu and type msconfig, then click Open:

2) Select the Boot tab, then UNcheck Safe boot and click OK.

3) When you’re prompted to restart your computer to apply these changes, click Restart and you’ll boot into normal mode.

Method 4: Start Safe Mode from the login screen

If you can boot to the login screen, you can enter Safe Mode from there:

1) On your keyboard, hold down the Shift key.

2) While holding down the Shift key, click the power button at the bottom right of the screen, then select Restart.

The Windows RE (Recovery environment) screen will then display.

3) Click Troubleshoot:

4) Click Advanced options:

5) Click Startup Settings:

6) Click Restart.

Your computer will then restart and another screen opens showing a lot of different startup options.

7) On your keyboard, press the number 4 key to enter Safe Mode without internet access or the number 5 key to enter Safe Mode with internet access:

Can’t solve the problem? Try Driver Easy.

If you couldn’t solve your computer problem in Safe Mode but you can still run Windows normally, give Driver Easy a try.

Many computer problems are caused by outdated device drivers. So updating your drivers should always be one of the first fixes you try.

Driver Easy will automatically update all your device drivers to the latest correct version with just a couple of clicks. It will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

1) Download and install Driver Easy.

2) Run Driver Easy and click Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to any flagged device to automatically download and install the correct version of that driver (you can do this with the FREE version).

Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

How to start Windows 10 in Safe Mode and then exit later

Twitter LinkedIn icon The word «in».

LinkedIn Fliboard icon A stylized letter F.

Flipboard Facebook Icon The letter F.

Email Link icon An image of a chain link. It symobilizes a website link url.

Nearly every version of Windows has a Safe Mode feature. This lets you start your computer with just the basic files and drivers it needs to run — most extra features will be disabled, and programs will run more slowly. By default, you won’t even have internet access.

But Safe Mode isn’t meant to be used every day. You’ll use Safe Mode when your computer isn’t working correctly, or when it won’t start up at all. By only loading the essentials, it’ll help you narrow down what’s causing the problem: The system itself, or something else you installed.

Here’s how to boot in Safe Mode, and exit it when you’re done.

How to boot in Safe Mode in Windows 10

There are many ways to enter Safe Mode, but here are the three easiest.

Using the Power icon

If you’re signed in:

1. Click the Windows icon in the bottom-left corner.

2. Holding down the Shift key, click the Power icon and then Restart.

3. Your computer will restart, and then open onto a blue screen titled Choose an option. Select Troubleshoot, and then Advanced options.

4. Click Startup Settings, and then Restart. Your computer will turn off and on again.

5. Once the screen comes back, you’ll be given a few options. Press 4 to start your computer in Safe Mode, or 5 to start Safe Mode with internet access.

If you’re not signed in, do the same thing, but click the Power icon on the sign-in page.

Using the Settings app

1. Open the Settings app by pressing the Windows key + I.

2. Click Update & Security, and then Recovery.

3. On this page, underneath Advanced startup, click Restart now.

4. Your computer will restart onto the Choose an option screen. Here, click Troubleshoot, and then Advanced options.

5. Select Startup Settings and then Restart.

6. When your computer boots back up, you’ll be given some startup options. Here, press 4 to start your computer in Safe Mode, or 5 to start Safe Mode with internet access.

Holding down the power button

This is the method to use if you can’t boot into Windows normally.

1. Press your PC’s power button to turn it on.

2. As soon as you see something appear on the screen — probably the manufacturer’s logo — hold down the power button until the PC turns off again.

3. Do this two more times, and then turn on your PC again. As it’s starting, the words Preparing Automatic Repair will appear at the bottom of the screen. Let your PC go through this process — it should eventually boot onto the Choose an option screen.

4. On this screen, select Troubleshoot, then Advanced options, and then Startup Settings. When prompted, click Restart.

5. When the computer turns back on, press 4 to start your computer in Safe Mode, or 5 to start Safe Mode with internet access.

How to exit Safe Mode

There are two ways to exit Safe Mode.

The first — and easiest — is to just restart your computer. You can do this by holding down the power button, or by going through the Start menu.

If you’ve restarted your computer but it’s still in Safe Mode, you should:

1. Press the Windows key + R to open the Run menu.

2. In the text box, type msconfig and press Enter.

3. At the top of the System Configuration menu, click Boot.

4. Underneath Boot options, make sure that Safe boot is unchecked. Once it is, click OK and restart your computer again.

How to Start Windows 10 in Safe Mode (While Booting) [6 Ways] [MiniTool Tips]

Windows 10 Safe Mode is one essential diagnostic method to help you identify and fix possible causes of Windows 10 PC issues. This post provides 6 ways with step-by-step guides on how to start Windows 10 in Safe Mode (while booting) to troubleshoot the problems you are having with your Windows 10 PC.

Windows 10 PC is not working well? Once the computer is infected with malware, virus or installed some improper drivers, the PC may not behave normally, and freeze or crash occasionally.

Windows 10 Safe Mode may be helpful to help you diagnose and fix the issues of your computer. So, how to start Windows 10 in Safe Mode (while booting)?

Check the 6 ways with detailed guides on how to boot in Safe Mode Windows 10, and how to use Safe Mode to fix issues on Windows 10 PC.

If you suffer some data loss due to errors in Windows 10 PC, an ultimate data recovery guide is also provided in the second part of this tutorial to help you easily recover lost/deleted files for free.

Windows 10 Safe Mode

What Is Safe Mode?

Safe Mode is a built-in diagnostic mode of Windows 10 (7, 8, etc.) computer operating system. If you start Windows 10 PC in Safe Mode, it will only allow starting up basic system programs and services in booting process. A Windows 10 PC booted in Safe Mode is a stripped down version of computer.

Windows 10 Safe Mode is designed to help users to troubleshoot most problems within the OS of Windows 10 PC. It is also widely used to remove malware or ransomware in computer.

How Does Windows 10 Safe Mode Work?

In Windows 10 Safe Mode, the OS will be started with only core components, and many other non-necessary drivers or services such as video drivers, sound will be disabled. Third-party startup programs are also prevented from loading. And this makes it easier to isolate causes of operating system problems.

For instance, you can start Windows 10 in Safe Mode to identify if it’s the Windows 10 default settings and drivers are causing the misbehaving of Windows 10 PC, or to diagnose if it’s the installation of poor-configured software/programs that prevents Windows 10 PC from booting in a normal state. Windows 10 Safe Mode allows you to safely remove bugged programs, solve driver issues, diagnose hardware conflicts, and more.

Besides, sometimes if you can’t start Windows 10 PC normally, but you can still start Windows 10 in Safe Mode. This makes it a good option to troubleshoot problems of PC, e.g. blue screen, black screen because of malware, virus infection, or inferior hardware drivers.

When You Need to Start Windows 10 in Safe Mode

If your Windows 10 PC seems to have some problems, doesn’t function well, keeps crashing/freezing, or occur blue screen/black screen time to time, then you may try to start Windows 10 in Safe Mode to fix some Windows 10 issues.

The Three Types of Windows 10 Safe Mode

Windows 10 offers three types of Safe Mode. You can choose to boot Windows 10 in any type of Safe Mode based on your own need.

Let’s cut to chase, check how to start Windows 10 in Safe Mode in these 6 ways, namely, through Settings, msconfig (System Configuration), Start menu, F8 key, from sign-in screen, black/blank screen.

Quick Video Guide:

1. How to Start Windows 10 in Safe Mode from Settings

If you’ve already logged into Windows 10 computer, then you can boot into Safe Mode in Windows 10 with Advanced Startup tool.

Step 1 – Open Windows Settings

You can click Start menu and click Settings on Windows 10 PC. Or press Windows and I keys on the keyboard to open Windows 10 Settings.

Step 2 – Enter into Startup Settings Window

Then you can click Update & Security, choose Recovery option from the left panel, and click Restart now under Advanced startup to enter Windows RE (Recovery Environment).

Step 3 – Choose a Safe Mode Option

You can now choose preferred Safe Mode option to start Windows 10 in Safe Mode.

Press 4 or F4 on the keyboard to start Windows 10 PC in Safe Mode; press 5 or F5 to boot Windows 10 in Safe Mode with Networking; press 6 or F6 to access Windows 10 in Safe Mode with Command Prompt.

How to stop Windows 11 update? This post provides 5 solutions to let you disable automatic updates on Windows 11. Check the step-by-step guide.

2. How to Start Windows 10 in Safe Mode through msconfig

If you can enter into Windows 10 system, you can also try another way to boot into Safe Mode in Windows 10, namely, using Windows System Configuration (msconfig.exe) tool.

Step 1 – Open Windows System Configuration Tool

You can press Windows + R key, input msconfig in Windows RUN window and hit Enter to open the System Configuration utility.

Step 2 – Select a Safe Boot Option

Then you can click Boot tab. Under Boot options, you can choose a preferred Safe boot option based on your own need.

Generally, you can choose either Minimal or Network option to start Windows 10 in Safe Mode to troubleshoot problems in Windows 10 system.

Tip: Booting Windows 10 in Safe Mode through msconfig, your computer will start in Safe Mode each time you start your Windows 10 PC. To get out of Safe Mode, you can check the part of “How to get out of Safe Mode Windows 10” later in this post.

If you forgot Windows 11 password, you can check the 6 solutions in this post to reset/bypass Windows 11 password. Also learn how to change Windows 11 password.

3. How to Start Windows 10 in Safe Mode While Booting from Start Menu

If you can log in Windows 10, you can also boot into Safe Mode in Windows 10 by using Start menu.

Step 1. You can press and hold Shift key on the keyboard, and click Start menu on Windows 10 at the same time. Then click the Power icon in the Start menu and choose Restart.

Step 3. Next press F4, F5, or F6 to choose a desired Safe Mode option to start Windows 10 in Safe Mode while booting.

4. How to Start Windows 10 in Safe Mode While Booting from Login Screen

If you can’t log in Windows 10, but you can enter into the Sign-in screen, you can also enter Safe Mode in Windows 10 from the login screen by using Shift + Restart.

Step 1. You can restart the Windows 10 PC. When you see the Sign-in screen, you can also press the Shift key and don’t release, and click the Power icon at the bottom-right and choose Restart.

Step 3. After the Windows 10 PC restarts, you can see a list of Windows startup options. You can then press F4 to boot Windows 10 in Safe Mode, or press F5 to start in Safe Mode in Windows 10 with Networking.

5. How to Start Windows 10 in Safe Mode from a Black/Blank Screen

If your Windows 10 PC can’t start normally, you can also choose to boot Windows 10 in Safe Mode to troubleshoot problems there.

To boot your Windows 10 PC in Safe Mode from a black or blank screen, you need to enter into the Windows Recovery Environment (WinRE) at first by turning off and on the PC 3 times.

Step 1. Enter into WinRE

You can press and hold the Power button on your PC for 10 seconds to turn off the computer, then turn on the PC by pressing the Power button again. When the computer is going to boot the operating system (e.g., the computer manufacturer’s logo appears when restarting), rightly press the Power button again for about 10 seconds to turn off the device.

Follow the same process to turn off and on your Windows 10 PC 3 times. When the PC is turned on for the third time, the computer should enter into the Automatic Repair window now. If not, follow the same steps until the WinRE screen shows.

If the Automatic Repair couldn’t repair your Windows 10 PC problems, you can click Advanced options to enter into Windows Recovery Environment screen to try other options to repair PC.

Step 2. Enter into Startup Settings

Step 3. Start Windows 10 in Safe Mode with Networking

Then you can press F5 to start Windows 10 PC in Safe Mode with Networking. And this is a suggested option when you need to troubleshoot a black or blank computer screen. You can search on the Internet for solutions to the issues.

6. How to Boot in Safe Mode Windows 10 While Booting through F8 Key

In Windows 7, you can continuously press F8 key to enter into Advanced options window before logging into Windows. And we know that this method isn’t working in Windows 10 and 8 because Windows 10/8 has much faster booting speed.

However, you can still make F8 work again in Windows 10 with the BCD (Boot Configuration Data) Edit command.

Step 1. Open Administrator Command Prompt window

You can press Windows key and R key on computer keyboard at the same time to open RUN window. Then type cmd in the box, and press Ctrl + Shift + Enter key at the same time to run the Administrator Command Prompt window. Please do not simply click OK, because it won’t open the Command Prompt (Admin) window.

Step 2. Reactivate F8 key function

Then you can type this command line: bcdedit /set bootmenupolicy legacy. And hit Enter key.

Step 3. Reboot Windows 10 PC in Safe Mode

Next you can close the Command Prompt window, and restart your PC. Now before the Windows logo appears, you can constantly press F8 to enter into the Advanced Boot Options screen.

You can then use the arrow keys on the keyboard to choose to start Windows 10 in Safe Mode, Safe Mode with Networking, or Safe Mode with Command Prompt.

If you want to get rid of the F8 key function in Windows 10, you can follow the same operation to get into the Administrator Command Prompt window, and input this command line: bcdedit /set bootmenupolicy standard. Hit Enter and restart computer again.

How to Get Out of Safe Mode Windows 10

To get out of Safe Mode in Windows 10, you can follow the steps below realize it.

Step 1. You can press Windows and R key on the keyboard. And then input msconfig and hit Enter again to open the System Configuration window.

Step 2. Tap Boot icon and uncheck the Safe boot option, and click OK. Then your Windows 10 computer will boot in normal screen next time you start the PC.

How to Use Safe Mode to Fix Your Windows 10 PC Issues

Starting Windows 10 PC in Safe Mode can help you fix some problems of your computer.

1. Recover Lost Data/Files in PC

If your computer is infected by malware or virus, or has a system crash or hard drive error, you may lose some important data and files, and can’t start Windows 10 normally.

After you access Windows 10 in Safe Mode, you can use the best free data recovery software like MiniTool Power Data Recovery to easily recover deleted files or lost data in 3 simple steps.

MiniTool Power Data Recovery is a 100% clean data recovery tool which is compatible with Windows 10/8/7.

You can use this software to recover lost or mistakenly deleted files from PC hard drive, external hard drive, SSD, USB flash drive, pen drive, SD card (from Android, cameras, etc.), and more, under various kinds of data loss situations.

Download and install MiniTool Power Data Recovery on Windows 10/8/7, and follow the detailed guide below to recover lost data and files with ease.

Step 1 – Run MiniTool Power Data Recovery

Launch MiniTool Power Data Recovery to enter into the main UI. All the detected drives and devices on PC are displayed.

Step 2 – Scan for Lost Data on PC

Choose one partition under Logical Drives and click Scan button, and it will automatically scan for all lost, deleted and normal files on this partition. If you don’t know which partition contains the deleted/lost files, you can click Devices tab and choose the whole disk to scan.

Step 3 – Preview and save lost files

After the scanning is finished, you can browse from the scan result to find your needed files, and click Save button to store the wanted files to another drive or partition, or external hard drive, USB drive, etc.

MiniTool Power Data Recovery allows you to preview up to 70 types of files.

Show Lost Files, Find, Filter functions are available to help you quickly find the wanted files.

If your computer can’t boot or even can’t start in Safe Mode, you can still recover data and files in Windows 10 PC with MiniTool Power Data Recovery. Related guide: How to Recover Data When PC Won’t Boot

2. Remove Malware or Virus

If your computer is crashed or stops working because of malware or virus infection, you may boot Windows 10 in Safe Mode to scan and remove malware/virus.

You can also use Windows Defender in Windows 10 to scan and kill the malware and virus in PC. If you don’t have an antivirus program in your Windows 10 PC, it’s also possible to download and install one in Safe Mode only if you start Windows 10 in safe mode with Networking.

3. Uninstall Improper Software

If your Windows 10 computer can’t normally start or work because of some recently installed programs which may have conflicted drivers, you can uninstall the suspicious software from the Control Panel in Windows 10 Safe Mode. Then restart your computer to see if the problem is fixed.

4. Perform System Restore

If your Windows 10 computer runs unstable recently, you can perform a System Restore to restore the system to an earlier state which has a good configuration. But what if Windows 10 System Restore stucks in normal Windows 10 start mode? Then you may try to start Windows 10 in Safe Mode to run a successful System Restore without crashing.

Beyond above, you can also boot Windows 10 in Safe Mode to fix Windows 10 black screen, blue screen issues like the Kernel Data Inpage Error, and more.

Bottom Line

This post illustrates 6 ways for how to start Windows 10 in Safe Mode (while booting) with step-by-step guides. If your computer doesn’t run well, can’t boot, or has some other problems, you may try to start Windows 10 in Safe Mode to fix issues of your Windows 10 computer, and recover lost data and files with MiniTool Power Data Recovery Free.

Windows 10 Safe Mode FAQ

About The Author

Alisa is a professional English editor with 4-year experience. She loves writing and focuses on sharing detailed solutions and thoughts for computer problems, data recovery & backup, digital gadgets, tech news, etc. Through her articles, users can always easily get related problems solved and find what they want. In spare time, she likes basketball, badminton, tennis, cycling, running, and singing. She is very funny and energetic in life, and always brings friends lots of laughs.

User Comments :

Join for Exclusives

Connect with us for giveaways, exclusive promotions and latest news!

Follow us

Products

MiniTool Library

Hot IT Solutions

Support

Asia, Hong Kong, Suite 820,8/F., Ocean Centre, Harbour City, 5 Canton Road, Tsim Sha Tsui, Kowloon

Copyright © MiniTool ® Software Limited, All Rights Reserved.