How to root redmi note 9 pro

How to Root Redmi Note 9 Pro [3 EASY METHODS]

Hello friends, welcome to today’s guide, today I am going to show you about how to Root Redmi Note 9 Pro.

This guide is very straightforward. You just have to follow the steps carefully. I have shown you a total of 3 ways by which you can easily root your phone without any interruption.

To root your smartphone, you can use any of these three methods shown below. If any method fails, you can try the remaining methods.

I am saying this to you because rooting an Android phone is a complicated process. In such a situation, it is very tough to find out which method will work for your phone.

But you don’t have to worry at all, just you have to follow the methods given below, and you will be able to Root Redmi Note 9 Pro smartphone easily.

Table of Contents

About Redmi Note 9 Pro

Redmi Note 9 Pro is the latest budget segment smartphone launched by Xiaomi, and this smartphone comes with very amazing designs and powerful specs.

So let’s talk about the Redmi Note 9 Pro Specs, this phone has a 6.67-inch IPS LCD FHD+ screen, and is powered by a Qualcomm Snapdragon 720G (12 nm) SOC.

Also, talking about the storage variants of this phone, it comes with two Variants, the first is 6GB RAM/ 64GB internal storage, and second is 6GB RAM/ 128GB internal storage.

Talking about the camera, Redmi Note 9 Pro comes with Quad camera setup, in which the primary camera is 64-megapixels, then 8-megapixels (ultrawide) camera, then 5-megapixels (macro) camera and then 2-megapixel (depth) camera.

Moving on to the battery, the Redmi Note 9 Pro has a larger 5020 mAh big battery, and supports fast charging 30W, so let’s move on to our guide without wasting any more time

Quick Specs Of Redmi Note 9 Pro

What Is Rooting?

Rooting an Android simply means giving your phone a superpower. Once you root your phone, you have full control over your Android System. After rooting your phone, you can install a custom kernel, custom ROM, unlock your phone and remove pre-installed applications.

But before you root your phone, it is very important to know the advantages and disadvantages of rooting an android device.

Pros or Advantages Of Rooting Redmi Note 9 Pro?

Here are some Advantages of Rooting Redmi Note 9 Pro

Cons or Disadvantages Of Rooting Redmi Note 9 Pro?

Here are some Disadvantages of Rooting Redmi Note 9 Pro

Pre-Requirements

Now that you have learned about the advantages and disadvantages of rooting Redmi Note 9 Pro smartphone let’s straight jump into the process.

Let’s Root Redmi Note 9 Pro

Warning! All the Tutorials/ methods shown in this website are not tested for every smartphone.

If anything happens to your smartphone GuidetoRoot.com is not Responsible for any loss and damage to your smartphone. So, try these methods with your Own Risk!

Method #1: Root Redmi Note 9 Pro with Magisk

Magisk root method is a very advanced and safest method. And the best part of this method is that you will receive the OTA update, and you will be able to use banking apps without any problems.

Method #2: Root Redmi Note 9 Pro By SuperSU

This method is the most commonly used Rooting method. For this method, we need TWRP recovery or any Custom recovery.

Method #3: Root Redmi Note 9 Pro By KingoRoot ( Without PC)

If you are looking for a method in which there is no PC is requires then KingoRoot is the best option to Root Redmi Note 9 Pro without PC.

How to Check if Your Redmi Note 9 Pro Is Rooted Successfully or Not?

If you want to confirm the Root status and you want to check if your Redmi Note 9 Pro is Rooted successfully or not, follow the steps given below.

Conclusion:

So, I have shown you the complete Step-by-Step guide on how to Root Redmi Note 9 Pro smartphone. I hope you find this article useful and informative.

Which method do you want to try first with this guide?

If you have any doubts or questions related to this guide, do let me know in the comment section below, and I will try to resolve your issue as soon as possible.

Thank 🙂 you for reading this article until the end and don’t forget to share this article with your friends.

Breadcrumb

81403

Member

MOD NOTE: This guide is only for devices with Qualcomm Snapdragon chipsets, NOT MediaTek!

This tutorial guides you through unlocking and rooting your Redmi 9 Pro & Redmi 9S (or really any Xiaomi phone that came with MIUI11 and a Snapdragon processor) using official tools with verified sources. This is much more reliable than blindly trusting shady closed-source TWRP mods, which don’t fully work or flashing pre-patched boot images, which are not meant for your phone. Note that currently there is no official TWRP for any Android 10 phone.

I have tested this myself on Redmi Note 9S Global, MIUI V11.0.8.0.QJWMIXM. Everything is working as expected, there are no issues with SU and file managers as mentioned in the other thread.

1) Insert a valid and mobile data enabled SIM card and sign in or create a Mi Account. This is sadly necessary, as every unlock must be approved by Xiaomi’s automated system. It also forces you to wait for a full week with a countdown before unlocking is allowed. This step is necessary only once for the very first time.

3) Reboot to fastboot recovery mode (hold Vol- and Power when powering on the phone) and run the Mi Unlock tool on your Windows PC. After jumping through a few hoops, you should arrive at the following screen saying that you have to wait for 168 hours.

4) Reboot the phone and keep it powered on during the following week. When 168 hours have passed, repeat step 3 and this time it should finally unlock. Note that this erases your data, which is always the case when unlocking bootloader on any Android phone.

2) Install Magisk Manager (.apk) on your phone from the official Magisk repository.

4) Reboot your phone to fastboot recovery mode. Open a command prompt in the folder of the Mi Unlock tool and run

This flashes the patched Magisk-enabled bootloader to your phone.

5) Reboot the phone and that’s it! Verify root status in the Magisk Manager app.

Other useful stuff

papatzis

Senior Member

Thanks for the guide please can you check IF SafetyNet check passes succefull DM verify also?

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

81403

Member

Thanks for the guide please can you check IF SafetyNet check passes succefull DM verify also?

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

Klaus69

Senior Member

81403

Member

While I did not personally test it, it definitely should. As I said, the tutorial applies to any phone that came pre-installed with MIUI11 and likely any recent Xiaomi phone.

As long as the phone runs MIUI and has a single boot partition (ie. not A/B partitions), it will likely work. You just need to get the correct boot.img for your phone and Xiaomi thankfully provides the ROMs.

papatzis

Senior Member

I have s redmi note 4 with android 6 and magisk both are true most bank apps are not working if anyone of these are not true.

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

BlackOut_94

Member

Kinda new with this rooting, i reached the step 4 of part 2 and i got a successful message from the powershell after the command. I tried restarting the phone but is stuck in the boot animation (where it just says «unlocked» on the bottom of the screen and it just restarts over and over). Is this working ONLY on redmi note 9s/pro or also with the base redmi note 9? Any help would be much appreciated!

81403

Member

BlackOut_94

Member

81403

Member

You should always be able to access fastboot, even in a bootloop (by holding Vol- and Power for 15 seconds or so), unless you’ve overwritten it by accident. Does this work?

Also, your phone may be using a Global ROM even if bought in the EU, as was my case.

BlackOut_94

Member

You should always be able to access fastboot, even in a bootloop (by holding Vol- and Power for 15 seconds or so), unless you’ve overwritten it by accident. Does this work?

Also, your phone may be using a Global ROM even if bought in the EU, as was my case.

I tried multiple times to access fastboot, without success. It’s like it only recognizes the power button pressed, doesn’t matter if i press volume+ or volume- is just stuck in the initial screen. (if i could access fastboot i would be able to restore the stock rom to make it work again). Is it possible to delete fastboot? If i did, idk how. There are no alternatives to make it work again? (without fastboot at least).

Thank you for the quick reply btw

papatzis

Senior Member

I tried multiple times to access fastboot, without success. It’s like it only recognizes the power button pressed, doesn’t matter if i press volume+ or volume- is just stuck in the initial screen. (if i could access fastboot i would be able to restore the stock rom to make it work again). Is it possible to delete fastboot? If i did, idk how. There are no alternatives to make it work again? (without fastboot at least).

Thank you for the quick reply btw

What codename phone you have they’re 4 codenames for the redmi note 9 series.

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

BlackOut_94

Member

What codename phone you have they’re 4 codenames for the redmi note 9 series.

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

papatzis

Senior Member

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

81403

Member

I tried multiple times to access fastboot, without success. It’s like it only recognizes the power button pressed, doesn’t matter if i press volume+ or volume- is just stuck in the initial screen. (if i could access fastboot i would be able to restore the stock rom to make it work again). Is it possible to delete fastboot? If i did, idk how. There are no alternatives to make it work again? (without fastboot at least).

Thank you for the quick reply btw

BlackOut_94

Member

Στάλθηκε από το Redmi Note 4 μου χρησιμοποιώντας Tapatalk

Thanks, i tried your suggestion but didn’t help unfortunately,i remember i had the debug usb active but the pc does not recognize the phone, tried also with different usb ports

81403

Member

Thanks, i tried your suggestion but didn’t help unfortunately,i remember i had the debug usb active but the pc does not recognize the phone, tried also with different usb ports

That’s what i used the first time i messed up, i went to fastboot and recovered the phone without issues, but now if i keep pressed power button + any volume button it just turns on and off without doing anything else. Kept the buttons pressed for around one minute each, then my fingers started to hurt a bit

Huh, that’s odd, I’ve never seen this. I was able to launch fastboot on all the phones I’ve had so far, no matter what.

In any case, if you manage to solve this, please post a solution here

paulb86

Senior Member

81403

Member

paulb86

Senior Member

Similar threads

Breadcrumb

Top Liked Posts

MOD NOTE: This guide is only for devices with Qualcomm Snapdragon chipsets, NOT MediaTek!

This tutorial guides you through unlocking and rooting your Redmi 9 Pro & Redmi 9S (or really any Xiaomi phone that came with MIUI11 and a Snapdragon processor) using official tools with verified sources. This is much more reliable than blindly trusting shady closed-source TWRP mods, which don’t fully work or flashing pre-patched boot images, which are not meant for your phone. Note that currently there is no official TWRP for any Android 10 phone.

I have tested this myself on Redmi Note 9S Global, MIUI V11.0.8.0.QJWMIXM. Everything is working as expected, there are no issues with SU and file managers as mentioned in the other thread.

1) Insert a valid and mobile data enabled SIM card and sign in or create a Mi Account. This is sadly necessary, as every unlock must be approved by Xiaomi’s automated system. It also forces you to wait for a full week with a countdown before unlocking is allowed. This step is necessary only once for the very first time.

3) Reboot to fastboot recovery mode (hold Vol- and Power when powering on the phone) and run the Mi Unlock tool on your Windows PC. After jumping through a few hoops, you should arrive at the following screen saying that you have to wait for 168 hours.

4) Reboot the phone and keep it powered on during the following week. When 168 hours have passed, repeat step 3 and this time it should finally unlock. Note that this erases your data, which is always the case when unlocking bootloader on any Android phone.

2) Install Magisk Manager (.apk) on your phone from the official Magisk repository.

4) Reboot your phone to fastboot recovery mode. Open a command prompt in the folder of the Mi Unlock tool and run

This flashes the patched Magisk-enabled bootloader to your phone.

5) Reboot the phone and that’s it! Verify root status in the Magisk Manager app.

Other useful stuff

There is no stable and fully working recovery for Android 10 yet, unfortunately.

How data is used to unlock the bootloader?
I want to root this phone.

Since we have to have a phone service to unlock the phone, how much data is used?
I have no cell plan and have to get a prepaid sim.
Thx, d.

Allright, now I have a question of my own, the latest MIUI update has been rolled out to my device. My device is rooted as per the guide in the OP, Joyeuse version.

Can I take this update via OTA or do I have to reflash the stock boot.img from 11.0.03.0 before I take this OTA?

Thanks and regards from the Netherlands!

Okay, for the ones in the same situation I’ve managed to install the OTA without bricking / bootlooping etc. The way I’ve managed it is described below. Prerequisite: rooted phone with stock MIUI and stock recovery)

I cannnot stress enough that using this guide is at your own risk. Triple check the firmware files you download because if you **** up with a firmware for a different mainboard you can potentially hard brick the device.

And your phone is up to date and rooted again.

How to Root Redmi Note 9 Pro Without PC

In your personal experience, you might see bloatware into the interface layer, isn’t that right? If you want to throw them away entirely, you have to root Redmi Note 9 Pro.

Now you are thinking about how you will perform that, in that case, you didn’t have to think about too much because we have covered up everything in the following guide.

The deeper you go, the better you understand the process and won’t face any problem later; thus, let’s head toward the primary specs section to commence the procedure.

This smartphone launched in the Indian market on 17th March 2020. Talking about camera sensor 48MP + 8MP + 5MP + 2MP quad primary setup. Snapdragon 720G processor power redmi note 9 pro with 4GB Ram and 64GB storage. The smartphone was coming— with 6.67 inches (16.94 cm) 395 PPI, IPS LCD. We are moving to battery performance is 5020 mAh, USB Type-C Port with Fast Charging before starting the guide. Let’s understand what root is!

Table of Contents

What is Root?

The rooting access is a pathway to uncover the true potential of any regular phone. It takes the help of a command prompt that changes some system partition settings.

Usually, it breaks through the superficial system partition layer with codes, and there are several methods available on the internet, but the best would be the Magisk app.

You can cause rumble with features like boost performance, Custom ROMs, removing bloatware, increase storage limits; however, you need to know the pros and cons.

Here are some Points to Remember while Rooting

Advantage of Root Redmi Note 9 Pro

Sometimes it’s all about dressing the interface setup with elegant ROMs and creates a personalized experience ecosystem that works according to your wishful command.

If you desire to examine the smartphone deepest section, you can quickly access the administer directory. Which means you can control the entire device with no trouble.

Disadvantage of Root Redmi Note 9 Pro

There’s no doubt that most smartphone makers discourage rooting practices, while the harsh reality is way darker than you expect as you will lose warranty privileges.

In some extremely unusual cases, users have sometimes noticed that their device’s battery draining faster, and drastic overheating issues start to appear on the surface.

How to Install TWRP Without Using PC

Note: I assume that you have download the respective TWRP file for your device!

How to Root Redmi Note 9 Pro Using Magisk

Related Article:

You have reached the key to unlock the true power of your device’s throne. Now that you have a customized setting option, test out different applications at the same time.

On a side note, always remember the risks factor involved in the root process and its aftermath, so it would be wise to clear your doubts about not taking the wrong step.

Установите TWRP recovery и Root Redmi Note 9 Pro

Xiaomi — это бренд, который всегда был на рынке с отличными характеристиками. На этот раз бренд представил серию Redmi Note 9. На данный момент бренд представил только Redmi Note 9 Pro и Redmi Note 9 Pro Max. Эти устройства не имеют большой разницы, за исключением датчика основной камеры и огромной разницы. скорости зарядки.

Восстановление TWRP, вероятно, является наиболее часто используемым и самым популярным пользовательским восстановлением, которое мы все знаем. Для тех, кто привык к рутированию и установке пользовательских ПЗУ и т. Д., Они знают, что такое восстановление TWRP. Однако, для легковерных, восстановление TWRP позволяет пользователям устанавливать пользовательские ПЗУ / моды, делать полную резервную копию телефона, получать root-доступ на телефоне с помощью Magisk Manager.

Однако вам необходимо иметь доступ к TWRP, прежде чем вы сможете продолжить и получить root-права на Redmi Note 9 Pro (под кодовым названием curtana). И чтобы прошить образ восстановления TWRP, вам необходимо правильно следовать руководству, чтобы избежать ошибок.

И если у вас есть Xiaomi Redmi Note 9 Pro и вы ищете способы загрузить и установить TWRP Recovery на свой телефон, тогда вы находитесь в нужном месте, как в этом посте, и мы расскажем, как загрузить и установить TWRP Recovery. на Xiaomi Redmi Note 9 Pro и, возможно, рут с помощью Magisk.

Шаги по установке TWRP Recovery на Xiaomi Redmi Note 9 Pro (curtana)

Теперь, прежде чем мы продолжим и установим TWRP Recovery на Xiaomi Redmi Note 9 Pro, давайте составим список предварительных условий, необходимых для его разблокировки:

Зарядите свой телефон

Перед установкой восстановления TWRP убедитесь, что ваш Xiaomi Redmi Note 9 Pro заряжен на 60%, чтобы избежать проблем с загрузкой во время процесса разблокировки.

Сделайте полную резервную копию

Перед рутированием одна из самых важных вещей, которые вам нужно сделать на своем телефоне, — это сделать полную резервную копию вашего телефона. Для этого вы можете следовать руководству, перейдя по ссылке ниже:

Включите параметры разработчика

Чтобы включить функцию разработчика на вашем устройстве, выполните следующие действия:

Вам также необходимо включить опцию USB-отладки и OEM-разблокировки в меню «Параметры разработчика». И для этого:

Установите инструменты ADB и Fastboot

Вам необходимо установить на свой компьютер последние версии инструментов ADB и Fastboot. Для этого вы можете перейти по ссылке ниже:

Разблокировать загрузчик

Чтобы установить TWRP Recovery, вы должны сначала разблокировать загрузчик на Redmi Note 9 Pro.

Прежде чем вы начнете разблокировать загрузчик, я настоятельно рекомендую вам создать резервную копию памяти вашего устройства и всех ваших файлов, хранящихся на вашем устройстве. Разблокировка загрузчика сотрет все данные на вашем устройстве. Кроме того, рекомендуется очень внимательно следовать инструкциям, упомянутым в этом сообщении, чтобы избежать необратимого повреждения или зависания вашего устройства. Если что-то пойдет не так, автор или руководство смартфона ответственности не несут.

Scarica i драйвер USB Xiaomi

Вы можете перейти по ссылке ниже, чтобы загрузить правильные драйверы Xiaomi USB для вашего телефона.

Скарика TWRP Recovery

Здесь вы найдете последнюю версию и восстановление TWRP для Xiaomi Redmi Note 9 Pro.

Инструкция по установке TWRP

Следуйте пошаговым инструкциям, приведенным ниже, чтобы установить TWRP Recovery на свой Xiaomi Redmi Note 9 Pro.

Получите root права на Xiaomi Redmi Note 9 Pro с помощью Magisk

How to root Xiaomi Redmi Note 9 Pro using Magisk

Xiaomi is one of the leading smartphone selling companies in India. According to Counterpoint Research, Xiaomi holds a 30% market share in the Indian smartphone industry. The journey started back in 2014 & since then the company is ever-growing and expanding in the Indian market.

Xiaomi released the Redmi Note 9 Pro device in May 2020. The device features Snapdragon 720G (8 nm) Octa-Core processor and it comes with Android 10 out-of-the-box. The phone sports a quad-camera setup on the rear end which can be used to click some excellent photos. Its front camera houses a 16MP lens perfect for capturing some trendy selfies.

The device runs on a customized version of Android 10 with MIUI running on top of it. But, if you are bored using Stock ROM and want to explore some more options with rooting, this article will help you with that. Without further ado, let’s check out how to root the Redmi Note 9 Pro.

Root Redmi Note 9 Pro using Magisk

As of now, a reliable TWRP recovery is not available for the device. So, we will be using a Magisk patched boot image for the rooting purpose.

Step 1

First of all, you need to unlock the bootloader. You can do it by using Mi Unlock Tool which can be downloaded from the link below.

Source: Mi Community (Click/tap to enlarge)

Step 2

Secondly, you are required to download the following set of tools to get started with rooting.

USB Driver – Install it on your system after downloading.

Minimal ADB and Fastboot (v1.4.3) – Install on PC, C-Drive recommended. Choose system-wide installation.

Step 3

Now, go to Settings > About Phone > Tap MIUI version 7 times. After that, you will be allowed access to the device’s settings as a developer.

Step 4

Enable USB debugging. You can do that by clicking on Settings > Additional settings > Developer options > USB Debugging and enable the toggle.

Step 5

Ensure your battery juice is at least 50% and connect the device with a laptop using a USB cable.

Note: Before proceeding, disable driver signature enforcement in Windows 7/8/10 64-bit.

The next process is to create Magisk patched boot image and; you are required to follow the below-mentioned steps for it.

Create Magisk patched boot image for rooting-

Step 1

Firstly, open Settings > About phone > System update.

Step 2

Click on the 3 dots and download the latest package.

Step 3

Secondly, open File Manager > Download folder where the ROM is located. Extract the ROM file and choose Extract here.

Source: Mi Community (Click/tap to enlarge)

Step 4

Finally, open Magisk Manager and click install both times asked.

Source: Mi Community (Click/tap to enlarge)

Step 5

Choose “Select and patch a file”.

Step 6

Open storage and select the boot.img image file that you extracted.

Step 7

The patching will begin after you click on the image. It will display the following location – magisk_patched.img.

Source: Mi Community (Click/tap to enlarge)

Step 8

When done, go to File Manager.

Step 9

Copy and paste the downloaded folder on your laptop/computer. This will help you to flash later for rooting. Now, as we are done with the creation of the patched boot image for rooting, we can proceed further to fastboot.

Flash patched image

Step 1

Move the patched boot image to the location where ADB and Fastboot are installed on your PC/laptop.

Step 2

Rename Patched Boot Image to boot.img.

Step 3

Next, reboot your Redmi Note 9 Pro in Fastboot by pressing Power + Volume Down button simultaneously.

Step 4

When done, connect the device to the PC/laptop.

Step 5

Go to the folder where ADB and Fastboot are installed.

Step 6

In the ADB and Fastboot, hold down the Shift key, right-click on the keyboard and choose “Open a command window here” or “Open PowerShell window here” from the pop-up dialog.

Step 7

Now, we need to flash the patched image by running the following commands.

Execute the following command to check if the device is connected properly:

fastboot devices

Next, fastboot flash the Patched Boot Image as follows:

fastboot flash boot boot.img

After flashing, enter the following command to reboot:

fastboot reboot

Finally after rebooting, launch the Magisk Manager App and click Install. So, with that, the status will be updated.

With that, you will have rooted your Redmi Note 9 Pro. If you face any trouble, feel free to discuss the issues with other readers in the comments section below.

Article by: Vaibhav Chawla

PiunikaWeb started as purely an investigative tech journalism website with main focus on ‘breaking’ or ‘exclusive’ news. In no time, our stories got picked up by the likes of Forbes, Foxnews, Gizmodo, TechCrunch, Engadget, The Verge, Macrumors, and many others. Want to know more about us? Head here.