How to use decal tool tf2
How to use decal tool tf2
How to use decal tool tf2
| 6,204 | уникальных посетителей |
| 291 | добавили в избранное |
For these decals, we only need your photo cropped in a square, for convenience. This can be done by opening your desired image with Microsoft Photo, the default app, and clicking «Edit & Create» in the top right corner, and choosing the first option, «Edit».
You know you’ll have done it right, because if you move the edges of the photo, or the white dots in each corner of the picture, the image’s size will remain square no matter how you manipulate it.
Once you’re happy with the image, click «Save a copy» in the bottom right comer. Please remember that the Clan Pride is circular, so don’t crop an image too harshly if the corners are essential. If you’re unsure how your Clan Pride will turn you can preview it on the website Loadout.tf. [loadout.tf]
Once you have your cropped image, go to this website, click here! [www.iloveimg.com] Click «Select Images», and once you’ve opened your image, change the «Height» and «Width» both to 128. Click «Resize Images» in the corner, and then download your result.
IMPORTANT : If this image is going to be used for your Conscientious Objector, you not only want the image in 128×128, but you’ll also want it to be a png. Please DON’T just rename the file or change its properties, TF2 will refuse to make the image in full colour otherwise. Instead, use a conversion website, I recommend this one. [image.online-convert.com]
If you’re not too worried about having a perfectly lined up image for each one of your Flair! badges, or you’re not confident enough to have a go with Gimp or Photoshop, then no worries, this might be the option for you.
«Instagram Layout», or «Layout from Instagram: Collage», is the perfect app to make your four badge pictures. It’s available on the Google Play Store and App Store, for free. Install the app on your phone, as well as your four desired pictures.
Once you have everything downloaded, open the app and select your four images. The first option at the top of the screen is what you want, all four images in a 2×2 grid.
Tap the 2×2 grid and once you start dragging or pinching a specific picture, you will change it’s size and how much or little it should be zoomed in.
Please remember that Flair! uses the whole image, and applies the edges of the images to the side of the badges, not just the front, so if you’re using a circular logo or image, you want your image to sit comfortably in the middle, and not to touch the corners.
Once you’re happy with the result, tap «Save» in the top right corner, and you’ll have your image saved to your photos on your phone.
Send the result to your PC, and then go to this website, Click Here! [www.iloveimg.com]
Click «Select Images», and once you’ve opened your image, change the «Height» and «Width» both to 128. Click «Resize Images» in the corner, and then download your result.
IMPORTANT : Please make sure your photo is a png. If you just change the files pictures name at the end to have a «.png», Team Fortress 2 will not be able to make it full colour. Instead, navigate to a conversion website, and have your picture become a png there. I prefer to use here [image.online-convert.com] for any conversions.
If you’d like to have your badges be perfectly lined up, or you’re just very picky about how they’ll look, this method should work.
I use GIMP, a free alternative to Photoshop. It’s a little daunting to use, but don’t worry, I’ll show you what to touch and do. You can install GIMP here! [www.gimp.org]
While it downloads, grab the four pictures you will use for your badges. Please remember to crop them to remove anything you won’t use, but remember not to cut too much out, we need a bit of background, even if some of it won’t be seen.
Finally, download this picture. It’s a template, that we’ll use for the flair badges. If you click on it here to enlarge, you can right click and download it. Alternatively, copy it’s link, paste it into your browser of choice, and download it there.
The colours on the template are the main images, what goes on the front of the badges. The white border of each colour is the sides of the badges. The black space won’t be seen at all.
Open GIMP, and at the top left, click «File», and look for «Open. «. Find your template and open it. Don’t worry if it asks to convert the image, converting or keeping it won’t matter.
With the template now open, right click your template on the bottom right, and click «Add alpha channel». This should be one of the option at the bottom.
Now go back to the top left, click «File» again, but this time click «Open as Layers», and then choose the first picture you’d like to be on your Flair!
Now when you open your first image, it will almost definitely be too big, and block out the template. Don’t worry at all. Simply navigate to the tools at the top left, and choose the 6th along the top. If you hover your mouse over it, it should read «Unified Transform Tool».
With this tool selected, now click on your large picture, and it should now be in full view, with crop squares at each corner. Click on the square, and move it until your image is small enough for one of the coloured badges. Make sure to press enter, once it’s at the desirable size.
Bellow, I’ve shown my first badge in the position I want it, but I’ve also used a red arrow to highlight the opacity bar on the right. The opacity bar helps make your picture transparent, so you can see the colour bellow. Use this to make sure the image is in the perfect place for your badge.
IMPORTANT : Make sure you set all your images to 100% opacity before you export the image, or else the final product will keep the vaguely transparent image.
Now repeat this process for each image, opening them in a new layer, placing them in the correct position, and returning their opacity to 100% once you’re finished with them.
Once you have your four pictures in their correct places, and you’re happy with the final product, go to «Image» at the top left, same place as «File», and in the «Image» menu, choose «Scale Image. «.
Set both the «Width» and «Height» to 128.
Once you have your final product, click «File» and choose «Export as. » which can be found in the middle of the menu. Save your final product as a png, by putting «.png» at the end of your pictures name before you export it.
For these two items, you can use TF2 Decal Patcher. This application will force any image you apply to the Clan Pride or Photo Badge to be in full colour. However, due to it being an external program, you can might trigger VAC if you join a server with this program. Therefore, do all of this on the main menu, not in a game. And delete the app once you’re done with it. You can install it by clicking here. [github.com]
Click on «tf2patcher-win32.exe» to download it, and before you open it, make sure TF2 is closed.
Now run the program in the background, and then open TF2, but do not join any servers. Simply use your decal tool on your Clan Pride or Photo Badge, and you’ll see that no matter how you mess with your gradient slider, the photo remains in full colour. Neat, huh?
Once you’ve created your item, close TF2 and the program.
On your steam library, click the cog on the right when you’re on the TF2 page, and click «Properties». Navigate to «Local Files» on the right, and click «Browse».
Инструмент для нанесения наклеек
(Манн-юбилейные обновление и распродажа)
Инструмент для нанесения наклеек
Инструмент 5-го уровня
Наносит наклейку на особый предмет.
Число использований ограничено. Осталось: 1 раз(а)
Инструмент для нанесения наклеек — это одноразовый инструмент. Инструмент для нанесения наклеек позволяет пользователям наложить текстуру на выбранный предмет. При покупке предмета, с которым может быть использован Инструмент для нанесения наклеек, игрок получит один бесплатный Инструмент для нанесения наклеек.
Наложение текстуры происходит в пошаговом режиме. Поддерживаются следующие форматы изображений:
Изображения с неправильным размером или пропорциями могут быть растянуты или обрезаны для соответствия разрешению 256×256. Каждый предмет имеет свою особую схему наложения, шаблон для которой вы можете найти на странице предмета. После выбора текстуры она может быть отредактирована с использованием различных фильтров и наложена на предмет.
Стоит отметить, что с удалением эффекта Painterly вы больше не сможете создавать наклейки с полной гаммой цветов, вам будут доступны около пяти цветов.
И наконец, любое изображение, нанесенное на предмет должно соответствовать правилам в соглашении Steam, как указано в условиях предоставляемых услуг, когда вы применяете инструмент для нанесения наклеек.
How to use decal tool tf2
| 647 | уникальных посетителей |
| 12 | добавили в избранное |
Decal Tool Editor is a simple program that allows editing images to use them as a spray as with a
TF2 Decal Tool for your Objector and removing complicated software like Photoshop out of the way.
More features will be added with newer versions.
We will need the program and a Decal Tool
Download Link: DOWNLOAD LINK [repository.drakodark.com]
Here is a short tutorial about how to use Decal Tool Editor.
The first time you boot up the program, you will see a window pop-up like this.
Decal Tool Editor accepts PNG, JPG, GIF and BMP as file formats, the image doesn’t necessarily needs to be a perfect square, but the image should not be bigger than 1000x1000px.
To create a spray, open the program and make sure you have selected the «spray» option, then click on the icon to open an image file, once open you can adjust the image by dragging it by the visor or making click on or for the zoom. Once you have the image to your liking, click the «Create Spray» button.
You will see a window pop up in where you have to put a name for your spray, try using letters from aA to zZ and number from 0 to 9. Once you finished putting a name and click «accept» a message will pop up confirming the creation of the spray (Remember to verify the spray file on the TF2 installation directory, if it’s not correct you can configure it again by clicking on the icon).
Next up, inside Team Fortress 2 we go to Settings > Multiplayer, on the «Spray» section, we go ahead an click the «Import Spray» option
Search for your spray in tf > materials > vgui > logos and we open our spray to load it in TF2.
And that should be all, our spray will load and we can click accept to enjoy putting sprays on servers.
To create a decal, start up the program and make sure that the option is set to «Decal», then click on the icon to load up an image file, once opened you can adjust the image by dragging it from the visor or clicking on the or for zooming in and out. Once you get the image to your liking, click on «Create Decal»
Then a window will pop up, saying that the creation of the Decal was successful (Remember to verify that the decal is on the right folder, if it’s wrong then you can change up the location by clicking ).
Then inside TF2 we will need a «Conscientous Objector» and a Decal Tool, start using our Decal Tool along with our Objector, then we click «Search File»
Next, we search our decal in tf > custom > decal_tool_editor > scripts > items > custom_texture_blend_layers and we open the file called «paper_overlay.png» (without quotations) to load it in the Decal Tool, then we click next
In this part we don’t touch anything and we click next to finish it, and you will have your full colour Objector.
How to use decal tool tf2
Decal Tools are pretty cheap nowadays, so it’s the perfect time to give all those decalable items (Four) the gift of color.
This guide will explain how to get colored decals on Objectors, Flairs, Photo Badges and Clan Prides.
You’re gonna have to mess with files, so get ready.
| 64,880 | уникальных посетителей |
| 1,901 | добавили в избранное |
Once downloaded, drag the fullcolor folder to tf/custom.
Your path should be tf/custom/fullcolor/the stuff inside.
not tf/custom/the stuff inside, don’t be an idiot.
This is the easiest item to colorize, and it’s probably been covered in a few other guides, but I’ll include it for completeness’ sake.
For the Objector, the file you want to edit is paper_overlay.jpg.
That’s the sweater anime girl in the files you downloaded.
Open it up in paint or your image editor of choice, and put whatever you want instead, as long as the size stays 128×128.
Once that’s all done and saved, launch TF2, and apply your decal to the objector as you normally would.
Choose as a picture the paper_overlay you made. (It doesn’t actually change anything for objectors, but flairs and others act weird if you don’t pick the same image.)
Choosing a different picture from your hard drive changes nothing, so be sure the paper_overlay you made is the picture you want on your objector.
You should see your objector appear, with a fully colored image on it!
Click next to apply it, and it just works.
Flairs aren’t that different from Objectors, but there’s a small subtlety people often miss.
Go into your fullcolor folder, and in it, navigate to scripts, then items, then custom_texture_blend_layers.
For the Flair, the file you want to edit is flair_template_guide.png.
It’s Alf!
Just like the objector, edit that with a picture editor.
Anything’s fair game, as long as the image stays 128×128.
Once that’s all done and saved, launch TF2, and apply your decal to the flair.
Choose the flair_template_guide as the picture, and.
I never asked for this.
This trumps a lot of people, but the very simple fix here is to drag the little marker all the way to the left. If this doesn’t work, try switching color palettes as well.
Click next, and go wear your masterpiece.
The patcher has been updated to be faster and work without entering an image path manually.
This essentially makes everything else obsolete, although the old methods are still valid if you don’t want to run an executable on your machine.
The new patcher can be found here:
https://github.com/default-username-was-already-taken/tf2patcher
Read the instructions on the page, it has everything you need.
As long as you stay in the TF2 main menu while doing this, nothing wrong can happen.
VAC is only active when connected to a game server.
Of course, once done with the patching, restart the game before playing again.
The patcher only operates temporarily, so closing and reopening the game will put you back into a VAC-free state.
Just open TF2 in the main menu, and launch the patcher.
Afterwards, just open your inventory and apply a decal tool to your item.
No matter which image option you choose, it should show the image you picked, in incredible technicolor.
This method can be used for all decalable items, so if it works for you, go wild.
Well you’re pretty bad m8
Let’s check over a quick list to make sure you did it well:
How to use decal tool tf2
| 1,204 | уникальных посетителей |
| 20 | добавили в избранное |
Do you want to express yourself in TF2?
Do you want to make your items yours?
Luckily there are four items in this game that can have any image of your choice on them (granted you have a decal tool to use). This guide will go through all four items as well as the decal tool.
In order too apply custom images to your TF2 items, you must have a Decal Tool.
What is a Decal Tool?
A Decal Tool is a single-use item which will apply any image of your choice to four TF2 items, these being: Flair!, Photo Badge, Clan Pride, and Conscientious Objector.
The first of the four items which can be customised is Flair!.
Flair! is a community-created cosmetic item for all classes. It is a set of four small badges on the players chest.
Next up, Is the Photo Badge.
The Photo Badge is a community-created cosmetic item for all classes. It is an old-school polaroid photograph pinned to the chest of the player.
Now one that I quite like the most: the Clan Pride.
The Clan Pride is a community-created cosmetic item for all classes. It is a small medal attached to the chest held by a multicoloured piece of fabric.
Lastly, The one item that everyone knows and loves! The Conscientious Objector.
The Conscientious Objector is a community-created melee weapon for all classes with the exception of the Engineer and the Spy. It is a broken down wooden sign which has been ripped from the ground.