How to change disk in cmd

How to change disk in cmd

Applies to: Windows Server 2022, Windows Server 2019, Windows Server 2016, Windows Server 2012 R2, Windows Server 2012

Displays the name of the current directory or changes the current directory. If used with only a drive letter (for example, cd C: ), cd displays the names of the current directory in the specified drive. If used without parameters, cd displays the current drive and directory.

This command is the same as the chdir command.

Syntax

Parameters

Remarks

If command extensions are enabled, the following conditions apply to the cd command:

The current directory string is converted to use the same case as the names on the disk. For example, cd c:\temp would set the current directory to C:\Temp if that is the case on the disk.

Spaces aren’t treated as delimiters, so

can contain spaces without enclosing quotation marks. For example:

If extensions are disabled, the quotation marks are required.

To disable command extensions, type:

Examples

To return to the root directory, the top of the directory hierarchy for a drive:

To change the default directory on a drive that is different from the one you are on:

To verify the change to the directory, type:

компакт-диск

Область применения: Windows Server 2022, Windows Server 2019, Windows Server 2016, Windows Server 2012 R2, Windows Server 2012

Отображает имя текущего каталога или изменяет текущий. Если используется только с буквой диска (например, cd C: ), на cd C: диске отображаются имена текущего каталога на указанном диске. Если используется без параметров, на компакт-диске отображается текущий диск и каталог.

Эта команда аналогична команде chdir.

Синтаксис

Параметры

Комментарии

Если расширения команд включены, для команды CD применяются следующие условия.

Строка текущего каталога преобразуется в использование того же регистра, что и имена на диске. Например, cd c:\temp если это так на диске, в качестве текущего каталога будет указан C:\temp.

Пробелы не считаются разделителями, поэтому

могут содержать пробелы, не заключенные в кавычки. Например:

Если расширения отключены, кавычки являются обязательными.

Чтобы отключить расширения команд, введите:

Примеры

Чтобы вернуться к корневому каталогу, в верхней части иерархии каталогов для диска выполните следующие действия.

Чтобы изменить каталог по умолчанию на диске, отличном от того, на котором вы используете:

Чтобы проверить изменение каталога, введите:

Cd cmd command

Cd is the abbreviation or synonym for chdir. It is a command found inside the Windows Command Processor (cmd) that allows for change of the current working directory of a shell instance. The CWD (Current Working Directory) is a path (of a directory) inside the file system, where the shell is currently working. The current working directory is essential for resolving relative paths. Cd is a generic command found in the Command Interpreter of most operating systems.

Description of the Command :
Displays the name of or changes the current directory.

Type CD drive: to display the current directory in the specified drive.
Type CD without parameters to display the current drive and directory.
Use the /D switch to change the current drive in addition to changing the current directory for a drive.

Using the Command :

Syntax :

Apparent from the above output, it is not necessary for us to print the cwd as it is already being displayed by the prompt. Throughout the article, we will be using C:\Users as our CWD.

1. To a Directory of Current Drive :
To change the working directory, execute command cd followed by an absolute or relative path of the directory you are wanting to become the CWD. Where the path should qualify the following criteria –

Syntax :

2. To a Directory of Another Drive :
To change the working directory to another drive, execute command cd /D followed by a path to a directory. The path should qualify the following criteria –

Syntax :

3. An additional way to change the CWD to another drive without the usage of the cd command is to execute the drive letter followed by a colon.

Command prompt won’t change directory to another drive

I’m trying to compile some java (learning java currently), and to do so I need to change command-prompt’s directory.

It doesn’t change the directory. I try again using quotes:

Again it doesn’t change the directory. What am I doing wrong?

12 Answers 12

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

As @nasreddine answered or you can use /d

For more help on the cd command use:

Displays the name of or changes the current directory.

CHDIR [/D] [drive:][path] CHDIR [..] CD [/D] [drive:][path] CD [..]

.. Specifies that you want to change to the parent directory.

Type CD drive: to display the current directory in the specified drive. Type CD without parameters to display the current drive and directory.

Use the /D switch to change current drive in addition to changing current directory for a drive.

If Command Extensions are enabled CHDIR changes as follows:

The current directory string is converted to use the same case as the on disk names. So CD C:\TEMP would actually set the current directory to C:\Temp if that is the case on disk.

CHDIR command does not treat spaces as delimiters, so it is possible to CD into a subdirectory name that contains a space without surrounding the name with quotes. For example:

cd \winnt\profiles\username\programs\start menu

cd «\winnt\profiles\username\programs\start menu»

which is what you would have to type if extensions were disabled.

The directory you’re switching to is on another drive, you need to switch to that drive using :

then you can cd into the directory you want.

Use drive letter d for changing to D drive like:

When changing drives, you just need to type the drive letter, like d: (don’t use the backslash, like d:\; it doesn’t work).

You only use cd when moving between directories within the same drive.

you should use a /d before path as below :

The short answer

The correct way to go from C:\. \Admin to D:\Docs\Java drive, is the following command :

More details

If you’re somewhere random on your D:\ drive, and you want to go to the root of your drive, you can use this command :

If you’re somewhere random on your D:\ drive, and you want to go to a specific folder on your drive, you can use this command :

If you’re on a different drive, and you want to go to the root of your D:\ drive, you can use this command :

If you’re on a different drive, and you want to go to a specific folder on your D: drive, you can use this command :

If you’re on a different drive, and you want to go to the last open folder of you D: drive, you can use this command :

In order to move to D drive in windows use,

In order to move to E drive use,

same will be applicable for other drives.

If you want to change from current working directory to another directory then in the command prompt you need to type the name of the drive you need to change to, followed by : symbol. example: assume that you want to change to D-drive and you are in C-drive currently, then type D: and hit Enter.

On the other hand if you wish to change directory within same working directory then use cd(change directory) command followed by directory name. example: assuming you wish to change to new folder then type: cd «new folder» and hit enter.

Tips to use CMD: Windows command line are not case sensitive. When working with a file or directory with a space, surround it in quotes. For example, My Documents would be «My Documents». When a file or directory is deleted in the command line, it is not moved into the Recycle bin. If you need help with any of command type /? after the command. For example, dir /? would give the options available for the dir command.

Tips for changing directories in windows command line

Change directory

When we launch command prompt, the default directory it opens with is C:\Documents and Settings\logind. This is in Windows XP. In Windows 7 command prompt opens up with the directory C:\Users\loginid. Now let’s say you want to traverse to the directory C:\Windows\System32. The command for this is given below.

Change to a directory with spaces in the name

In Windows, we can have spaces in the directory names. cd command can interpret the space correctly. So we do not need to enclose quotes around the directory name, as with most of other windows commands. An example is shown below.

Change drive and directory with single command

The basic cd command does not work if you are trying to change to a directory that is located on a different drive. Say you are in C:\users\cmdadmin\ directory and want to change to E:\docs directory. If you run ‘cd e:\docs‘ you won’t get any error but you would still be in the same folder. Only when you switch the drive by running the command ‘E:’ you will move to the folder e:\docs. You can avoid this by using /d option with cd command.

This command changes to the drive E: and also changes the directory to E:\docs.

Tips for changing directories in windows command prompt

If you frequently work with windows command line, then the below tips would help you in easily changing the directories in command line.

Use Pushd and Popd commands:

Pushd command is similar to cd but it also saves the current directory path. So if you want go back to the directory where you have come from, you can just use popd command. It will take you to the last directory you were working in.

Pushd can remember all the previous directories you traversed as long as you change the directory using pushd instead of cd command. Using popd you can go back to all the previously visited folders in the reverse order. See the below example.