How to use any bluetooth dongle adapter on scp ds3 от wiltshire tutorials
How to use any bluetooth dongle adapter on scp ds3 от wiltshire tutorials
Как использовать контроллер PS3 на ПК
Контроллер Playstation 3, Dualshock 3, не самый простой геймпад для работы на ПК. Так зачем беспокоиться, когда намного проще использовать что-то новое? Что ж, в некотором смысле контроллер PlayStation 3 все еще особенный. В Dualshock 3 есть то, чего нет в лучших контроллерах для ПК: аналоговые лицевые кнопки, чувствительные к давлению. Это делает Dualshock 3 лучшим выбором для игры в эмулированные игры для PS2 в эмуляторе PCSX2. Metal Gear Solid 3, например, просто не работает без этих аналоговых кнопок.
И если вы просто предпочитаете старые контроллеры Sony переработанному Dualshock 4, это идеальный контроллер для игры в классические игры Final Fantasy в Steam. Вот лучший способ заставить ваш контроллер PS3 работать на ПК, используя инструмент с открытым исходным кодом под названием ScpToolkit.
Примечание: Steam на самом деле имеет встроенную поддержку DualShock 3, что означает, что вы можете просто подключить контроллер и настроить его через меню настроек контроллера в режиме Big Picture. Однако Steam не поддерживает гироскопические элементы управления DualShock 3 или (что еще более важно!) Его аналоговые лицевые кнопки, которые нам и нужны. Следуйте этому руководству, чтобы заставить контроллер PS3 работать на ПК с этими кнопками.
Как настроить контроллер PS3 на ПК
Что вам нужно
Аппаратное обеспечение
Программного обеспечения
УСТАНОВКА ПРОГРАММЫ
Руководство по установке ScPToolkit
1. Загрузите программное обеспечение, указанное выше, и начните с установки четырех пакетов Microsoft. Если вы используете ПК с Windows 7, вам также необходимо установить драйвер контроллера Xbox 360. В Windows 8 и 10 он уже встроен!
2. Важный шаг: подключите Dualshock 3 к компьютеру с помощью кабеля mini-USB. Теперь мы можем заставить его работать.
Примечание по установке Bluetooth: если вы также хотите использовать контроллер по беспроводной сети, убедитесь, что у вас подключен адаптер Bluetooth или включен Bluetooth на материнской плате. ScpToolkit отмечает, что вам нужен ключ Bluetooth 2.0 или выше, поддерживающий Enhanced Data Rate (EDR).
3. Загрузите ScpToolkit и запустите установщик. После принятия условий и выбора места установки вы получите меню со всеми вариантами установки, как на скриншоте выше. Я рекомендую оставить это значение по умолчанию. Щелкните Установить, чтобы начать установку.
Примечание по установке Bluetooth: убедитесь, что опция ScpToolkit Bluetooth Pair Utility отмечена галочкой.
4. Примерно через 30 секунд ScpToolkit будет установлен, и вы увидите этот экран с большой зеленой кнопкой с надписью «Запустить установщик драйвера». Поскольку это свежая установка, мы и хотим это сделать. Щелкните кнопку.
5. Этот экран может выглядеть устрашающе, но все же довольно просто! Установите флажки рядом с драйверами, которые хотите установить. В этом случае мы хотим убедиться, что установлен флажок Установить драйвер Dualshock 3 (он должен быть установлен по умолчанию). Теперь щелкните стрелку рядом с «Выберите контроллеры Dualshock 3 для установки», чтобы увидеть раскрывающийся список USB-устройств, подключенных к вашему компьютеру. Найдите в списке контроллер PlayStation 3 и проверьте его.
Примечание по установке Bluetooth: убедитесь, что установлен флажок «Установить драйвер Bluetooth». Как и в случае с Dualshock 3, щелкните стрелку рядом с «Выбрать ключи Bluetooth для установки» и найдите свое устройство Bluetooth в списке. Проверь это.
6. Наблюдайте, как SCP Toolkit выполняет процесс установки. Вы увидите множество всплывающих окон сбоку от экрана, когда он обнаружит ваше оборудование. Прокрутите журнал вниз, и вы, надеюсь, увидите «Драйвер Dualshock 3 USB установлен» (и «Драйвер Bluetooth установлен», если хотите), что означает успешную установку. Если все прошло хорошо, нажмите Exit.
7. Теперь, когда он установлен, вы увидите ScpToolkit в виде значка на панели задач. Найдите в меню «Пуск» диспетчер настроек ScpToolkit. Здесь вы можете изменить некоторые настройки, такие как отключение грохота, регулировка мертвых зон аналогового джойстика и многое другое. Большинство этих настроек можно оставить в покое.
ScpToolkit запускается с Windows по умолчанию, а также воспроизводит некоторые звуковые эффекты, которые могут показаться вам неприятными. Чтобы отключить их, перейдите на вкладку «Настройки звука» и снимите флажок «Включить звуки уведомлений».
Примечание для эмулятора PCSX2: Вкладка настроек PCSX2 позволяет вам установить исправление для плагина контроллера LilyPad эмулятора для поддержки чувствительных к давлению кнопок. Если вы планируете использовать контроллер PS3 с эмулятором, нажмите «Обзор», чтобы перейти к папке установки PCSX2, затем нажмите «Включить», чтобы установить исправление. Вуаля!
ИСПОЛЬЗУЙ ЭТО
Использование контроллера Playstation 3 на ПК
После установки Dualshock 3 должен вести себя как контроллер Xbox 360. Любая игра с встроенной поддержкой XInput — практически любая современная игра для ПК, поддерживающая геймпады — должна без проблем распознать ее. К сожалению, это означает, что он не будет регистрироваться в качестве контроллера PlayStation в нескольких играх, которые имеют встроенную поддержку DualShock 4, поэтому по умолчанию вы не получите правильные значки кнопок Square / Cross / Triangle / Circle. Однако в некоторых играх можно вручную выбирать значки кнопок. Ищите это в настройках игры!
BLUETOOTH
Как подключить контроллер PS3 через Bluetooth
Если вы не занимаетесь проводным бизнесом и выполнили все шаги по установке Bluetooth, описанные выше, вы сможете просто отключить контроллер, и через пару секунд он синхронизируется через Bluetooth. Когда это произойдет, вы получите уведомление на панели задач. Круто!
Это работает и после перезагрузки. Если вы разрешите ScpToolkit запускаться с Windows, вы просто сможете снова подключить контроллер PS3, и он будет мгновенно распознан. Как только светодиод загорится, отключите контроллер, и он снова будет синхронизирован через Bluetooth.
Если у вас есть проблемы с Bluetooth, возможно, ваш ключ не поддерживается. Вы также можете найти помощь в обсуждениях ScpToolkit на Github. Bluetooth может быть привередливым, и любая проблема, с которой вы столкнетесь, может быть связана с оборудованием, вашей конкретной версией Windows или драйверами … другими словами, удачи.
How to Use ANY Bluetooth Dongle/Adapter on SCP DS3
Показать панель управления
Комментарии • 2 297
For those who are looking for the original drivers:
-go to device manager
-right click your bluetooth dongle
-properties
-driver
-update drivers
-browse my computer
-let me pick from a list
look for generic usb bluetooth etc and install it and you are done 🙂
Great videos, thank you so much! I hated MotionInJoy and this was a wonderful solution! Plus, I can now use my bluetooth dongle that I previously wasn’t able to use with my controller. If you want a next project, maybe figure out how we can use the BT dongle for using our PS3 controllers, while also using it for other stuff. Or make it easier to switch drivers?
A massive thank you Wiltshire Tutorials you saved my life! I updated windows 10 and it deleted the drivers for my USB dongle (and installed a load of bloatware), but this video saved the day 🙂 Many thanks.
You’re welcome. Glad I could help in some way. Thanks for watching
Hello, Mr. Wiltshire! Thanks for all your video tutorials, as they have been super helpful.
Question about Bluetooth. I use a DS3 on Windows 8 and have followed all your install instructions, albeit using more recent versions of the SCP software and an ASUS USB-BT400, since your recommendation has been discontinued.
While this works, it seems like there’s a lot of lag, unresponsiveness to buttons, or that maybe it just goes»meh» once in awhile and buttons tend to «stick.» Have you encountered that or know what I mean? I could use a hand.
Hey, sorry for bothering you but I’m having trouble. It keeps saying «Host Address: «. I’ve already tried restarting the computer and plugging back the usb dongle back into the computer after getting back on the desktop. I’ve also reinstalled the drivers. The issue is still there. Do you have any suggestions?
This was really helpful! I’ve been months trying to figure out why this worked with the server but after closing it it didn’t work anymore. I was able to use my controller wireless like so but it was a pain to have to figure out what I did for it to work. Turns out I just needed to use this instead. And since I have exactly the same bluetooth Qualcomm atheros AR3011 3.0 but with HS adapter, this was such a lucky find. Giving you like and sub bro
The key to all my problems, right here. Thank you very much!
Gracias amigo eres genial!! :D, me subscribo, saludos desde México :). PD, no se inglés pero tus tutoriales son tan buenos que se entiende muy bien desde la navegación de archivos.
Thank you so much! This helped out alot! Well done on the clear instructions!
@Adam Johnson You’re welcome. Thanks for watching
if it says reserved, try to restart the service or server (whichever you use)
did you find a fix for this?
I definitely reccomend backing up your drivers completely before doing this, its also a good idea to backup your entire registry too. you can use Glary Utilities which has these functions in it’s advanced tab. This way if there is a major issue or if you decide to abort you have fairly perfect fallbacks to get your bluetooth dongle or any other device back to its working order.
Definitely a good practice
Helpful and simple guide, works well even today on Win10!
Glad to hear you found this useful. Thanks for watching and for leaving some feedback
I really like how you make your tutorials, they are very professional, help me really much! thank you! +sub 🙂
I’m glad that you like my videos. I do put a lot of effort into my videos! Thanks for watching and subscribing. I appreciate it a lot!
Hey thanks for the tutorial, it helped alot! I was wondering what is the theme of your desktop? How do I arrange the folders at the side like that?
Guys, when you have it plugged into USB and it says charging. hit the Pair button on the SCPSERVER.. this will lock the PS controller onto the bluetooth dongle you the drivers set to. unplug and wallah
@Mr. Schäeffer Thanks it worked man, I did a lil bit of researched on how to use it and it worked 😀
@#TambayanMusic Dude just use vigem with shibari is so much better i install it and never had a problem anymore.
@Brett Knibbs Now scp is deprecated, just use the vigem, with shibari is so much better and you don’t need to sacrifice your bluetooth dongle o use it and a ps3 controller and use the same dongle for other devices as well.
Absrapper Chainmastah buy a switch pro controller mate 15 quid Amazon and they just work. I use a program called rewasd to remap the buttons to PS4 and Xbox respectively because some games don’t like PS4 pads and some don’t like Xbox controllers. To keep using scptoopkit an inplace upgrade on windows which is basically a refresh of windows 10 will make it install every single time first time as long as the Bluetooth chip is compatible. Switch pro is identical pad just made it all work dead easy
Very helpful! Solved my bluetooth dongle issue, and I’m now up and running on Windows 8.1. Thanks!
@BFarmer1980 Glad to hear that. Thanks for watching.
Great Tutorial, worked after uninstalling old drivers and starting fresh. Much simpler than MotioninJoy.
@DigitalShadow Glad to hear that. Thanks for watching
Thanks you so much! Spent all day getting headaches trying to configure this. Your tutorial really helped!
You’re welcome. Thanks for watching
YOU ARE BRILLIANT!
i love the way how you demonstrate and you helped me so often until i reach my aim. Thanks a lot mate, really. Thumbs up und sub!
+iko3301 I wouldn’t call myself brilliant. I would say I have experience. I’m always glad to help! Glad to hear you got things working too! Thanks for watching, liking and subscribing. I appreciate it!
Thank you sooo much for your tutorials on SCP DS3 🙂
I basically did everything right but forgot one step so it didn’t work
@r3toun You’re welcome. Thanks for watching
Absolutely the most helpful video I have ever watched on X-vid. Thank You.
you are one of the best tutorial people on youtube in my opinion. every time i had an error there was a link to another video by you with all the drivers and files wrapped in a file with a pretty bow on top by you. thanks man you deserve this favorite, like and new subscriber
@crackthenut I appreciate the feedback. I try my best at tutorials. I’m glad you like them! Thanks for watching, liking, favouriting and subscribing!
Hey man, loving this tutorial! Question though, I followed all of the on-screen instructions and everything went the same up till you disconnected your PS3 controller and it synced with the BT. Mine keeps blinking for a while, then turns off, and the driver slot still says reserved. I got all the goodies installed, is there anything else you can think of for this to sync up?
hi
its paired but only working with usb when i remove usb it says reserved but doesnt bluetooth pair please help
the host is connected :54:35:30:8A:08:62
but the pad 1 reserved after removing usb
quick answer plz
And again, I love your tutorials
+RygalKirisame Glad you like my videos! Thanks for watching!
Thank you! I didn’t want to bother with motioninjoy and this was the perfect alternative for me! SCP is my favorite.
+Sara Ann You’re welcome. Thanks for watching
THANK YOU SO MUCH! This, along with 2 or 3 of your other SCP videos, really helped me out mate.
+Graasvin You’re welcome. Thanks for watching
Very very helpful 🙂 I’ve followed dozens of guides but the bluetooth never worked for me. Zadig did the trick! Thank you.
Glad to hear that. Thanks for watching
Is it possible to roll back to the original BT driver after replacing it?
Tnak you so much you helped me a lot 🙂
ArtificialSpirit Oh my god thank you so much kind sir. I accidentaly installed the bluetooth thing to my usb wireless connection thingy and it stopped working. Then I did what you said here and my computer restarted. I was so afraid that it wasn’t going to work and it worked. Thank you so much.
i tried this method, but no luck, it keeps installing back DS3 driver after «Scan for hardware changes»
In device manager, at the end of the list under «Universal Serial Bus Devices» you will find your bluetooth device listed there, just uninstall it then from the «Action» menu choose «Scan for hardware changes» and the driver will be installed automatically by windows and you will get your old Bluetooth driver.
Hello, Wiltshire. Thanks a lot for the tutorial. I am having a strange problem with this method. It works great for a time, but after I shutdown my computer, sometimes my bluetooth adapter stops pairing with the controller. I noticed that HCI version that is displayed on the Scp monitor is 6xxx, when it works (pairs), but after a pc restart, it sometimes change to something like 7xxxx, thus my controller stops pairing with the bluetooth adapter. To solve this, I must reinstall the default bluetooth driver, swap driver with zadig and then config again at scp driver. I also disabled the windows update for drivers and disabled the windows option to automatic install drivers, but it did not solve the problem. Is there a way to fix this problem? Like manually changing the HCI version, manually pair the controller. Could you please help me? Thanks in advance.
Thanks, man. Your Tutorials for the PS3 controllers were a big help!
+Guy Person You’re welcome. Thanks for watching
Thanks for all the help :D! Great video and very helpful.
@shadows879 You’re welcome. Thanks for watching
Thank you so much for these videos. I was facing a problem in which my PS3 was turning on whenever I unplugged the DS3 usb cable from my PC. I fixed it by removing the power cord from my PS3 and then the DS3 was properly synced to the dongle.
Mine doesn’t work 🙁 I have Asus BT400. I tryied my usb to usb 3.0 and 2.0. I am using windows 8.1 64 bits.
I did everything on this video and it still doesn’t work.
On host addres it says series of numbers like you but those are different.
Amazing. It works! No harm. I always wanted to get that working and I finally did it thank to You.
Glad to hear you got things working. Thanks for watching.
thanks man this helped! i was going crazy trying to figure out how to connect it to my bluetooth dongle, it felt hopeless, like i needed a degree in quantum computing, then i stumbled upon your little gem of a video 😀
@Wiltshire Tutorials u saved my life lol
Glad to hear you things working! Thanks for watching
THANK YOU! finally a video on SCP bluetooth where someone actually is competent to explain what to do. After many uninstall re-install watching videos on how to install SCP NONE show this programme to use. Great stuff you have an IQ of 1 million and twenty point 5!
You’re welcome. Glad I could help. Thanks for watching
Thanks a ton, helped a lot!
Yo, i was able to use bluetooth once, but after i restarted my computer it stopped working.
Any ideas?
Already restarted computer
Replace the driver with the preset again man
Try open the ScpServer and see what happens
+Nishi Notrel Same problem here, any solution yet?
Hey dude! I had some trouble with bluetooth on your other vid and then decided that I wanted to use my bluetooth adapter for Wii emulation. Turns out Wii emulation was more of a novelty and I never really played Wii on my desktop anymore so I gave this another go, this time using the method outlined in this vid, and it worked!
Thanks for the tutorial, man! I notice there are 2-3 frames of input lag via my USB 4.0 adapter, but that’s practically unnoticeable. 😀
Hi, thanks for the tutorial, and it works perfectly. However I used the bluetooth controller on my motherboard and I don’t know how to disconnect now. My DS3 controller is forever connected to my computer. Is there a way to restore the bluetooth to its initial state, or disconnect my controller? Thanks again.
Hi Mate, thank you for the video. Could you please tell us what tool are you using to organise your desktop items / shortcuts? I saw it on the begening of the video and looks very cool.
@David Veselinov you’re welcome! Thanks for watching
@Wiltshire Tutorials thank you so much
######Important Notice#######
For all those getting the «reserved» or «none» message when trying to pair, it’s because your dongle is not good enough i.e. 2.0 is too low. I used a 2.0 and i got the «reserved» and «none» however I then got a 4.0 and it worked.
*NOTE my STEPS with 4.0
1) plugged in controller whilst installing driver via zadig
2) opened scp monitor then unplugged controller and saw «reserved» error so i reconnected ps3 controller
3) whilst scp monitor is opened and controller plugged in, i opened scp server then unplugged controller
4) went back to scp monitor and voila! it works!
#######THUMBS UP SO PEOPLE CAN SEE THIS######
Well how to you fix that?
Server Application has no effect for me, i’m on 4.0
It all looks good in the SCP monitor, but i get nothing in server
That is an issue with you not getting the SCP Service to install
@***** Playstation controllers require a minimum of Bluetooth version 2.1
@***** IT WORKED YOU DID IT U HAVE THE SOLUTION I LOVE THANK U LOL 😀
Hey, great channel great videos, helps me every time!
here’s the deal, I got a cheap dongle I got for like 2$.
my PS3 controller worked great with a USB cable (thanks to 3 videos I think you did on the subject). and when its connected with a cable the monitor shows Host address and charged.
I follow the steps of this video and my Dongle name is Generic Bluetooth Radio. after the tutorial the name changed to BTH DS3 Device. my controller seem to connect to it. my 1 led is on and the monitor shows a Host address and Pad1 shows «none» at then end. even tho it doesnt seem to work. when I try to use it game wont respond, only when I connect my cable back.
Cheap eBay dongles tend to not work. I recommend the Asus BT-400
From man to man, for what you did, I LOVE YOU. you helped me a lot dude thanks (Y)
@JOKER KYZAR You’re welcome. Thanks for watching
Odd, I’m not really sure why it is doing that :/
It’s already disabled and I don’t see how that could be the problem since after a restart my built in BT is still not detected as a BT receiver. The driver is not overwritten but the BT dongle seems unable to detect my DS3 each time the system is restarted.
Try disabling the auto driver installation feature on Windows?
Thank you so much! It worked for me. Just bought a random brand bluetooth dongle and when I selected XBOX 360 controller in the list it didn’t work, but when I selected DS3 Driver it showed «upgrade» instead of «replace». Then it worked just like you showed.
You’re welcome. Thanks for watching
the ones that arent blue inside
I used just a regular usb 2 port.
can u tell me in which port did u put it?
Thank you so much that got mine working also
Hey! The tutorial works perfectly for the first time I connect my controller. But after disconnecting once, I can’t reconnect it again via bluetooth. So, how do i reconnect it? is there any shortcut like there is L1+R1+PS Button for disconnecting? Or I have to connect via USB again and unplug? It isn’t working actually.
Thank you so much! saved me hours of trying to figure out how to install this on my aw17
Glad I could help. Thanks for watching
Thank you for the explanation, your video is very helpful 🙂
+Juhanda S. You’re welcome. Thanks for watching
Thank you so much my Friend, i have been trying to get this paired for days, for some reason scp was not doing it automatically, and i new my adapter was supported, Great job
I FINALLY GOT IT TO WORK! YOU LEFT OUT ONE IMPORTANT MESSAGE. YOU NEED TO RUN SCPSERVER.exe ON THE BACKGROUND. TRY THIS IF OP’S VIDEO NOT WORK FOR YOU.
just says error now instead of Disconnected
@Utku Man i searched and looks like inputmapper only works with ds4 and not ds3 at least in bluetooth thats sad :/
do you use a dongle? I have bluetooth 4.2 but it wont work still
Where can I find scpserver.exe? answer please.
Thank you! I installed the latest (pre-release) build of SPCToolkit, and it did not recognize my bluetooth Dongle and therefore never installed this driver. I couldn’t figure out why my controllers were no longer synching to my bluetooth, but this made it clear and also provided a solution.
I also used ScpToolkit before and followed the tutorial, but it still doesn’t work. Please help.
+CandyCinema You’re welcome. Thanks for watching
Wiltshire, thank you! THIS made it work wirelessly with my ASUS BT400 4.0. The main video for some reason only did it wired. Cheers!
Worked just as easy as you said, was going through pain trying to get this to work before, thanks alot.
You’re welcome. Thanks for watching and for leaving some feedback!
Thanks a lot, been playing around with the thought of buying a new wireless controller for pc (been using ds3 with usb so far).. now the bluetooth dongle was much cheaper 🙂
Glad to hear you got things working. Thanks for watching
it works but it always stops working when i restart my computer. for examply i install it. it works to play the game, and then when i turn my computer off and turn it on again the controllers wont connect until i manually uninstall through device manager and reinstall with zadig. how do i make the custom driver permanent?
@Brett Knibbs what is it?
So, what was the easy way around it?
There is an easy way round that but being 2 yrs ago u probably solved it lol
Try the newest scptoolkit. Didn’t even need to use zadig anymore
I know it’s been sometime since you’ve made this video, but I wanna thank you, because it’s so so so so much better than Motioninjoy, I wish I saw this video when it came out. Thx again.
This clip literally saved me so many hrs and frustrations. Thank you.
You’re welcome. Thanks for watching
So, after a month I bought a new decent dongle and it works perfectly, but it does take a shitload of time for the computer to identify the controller (as opposed to a few seconds on the PS3, the PC takes about 30s-1min30 to find the controller). Other than that, its perfect. Thanks for the tutorial.
Excellent tutorial, the only one that worked for me!
Glad to hear that. Thanks for watching!
I did everything up to the host address thing, it was not there so i restarted my computer, then the monitor doesn’t open, the shortcut and the non-shourtcut..
please help
EDIT: k, i got it now it was open in the background. but i have another problem, it still says no host address.
what do i do now?
I got it to work awhile ago, not sure what the issue was.
@_Just Try uninstalling scp then install it again in Install Summary i don’t see my USB Bluetooth but it works.
@_Just you need to run the scp server first then press bluetooth buton on the laptop (for me its fn + F3) and then connect the controller that worked for me but my laptop freezes when controller isconnected for some szeason
@DaCookieMonsta Having the same problem with an ASUS BT400 adapter. :\
Watching your video, I finally got my PS3 controller to work with my BT400 dongle wireless! I gave a thumbs up and you now have a subscriber! Thank you very much.
Glad to hear you got things working. Thanks for watching and subscribing
Thank-you It worked like a dream! You Rock Man
Man you’re awesome. I finally get rid of DS3 Thanks to you!!
Thank you very very much, I tried everything to get out of MiJ but it always prevent me to detect my bluetooth dongle so I finally realize that disabling the security policy of automatically installing unknown devices is the solution of escaping from it. Then I repluged my dongle and it worked and identified itself as a bluetooth adapter(Hell Yeah!!) then I tried your solution without MiJ and worked! Finally I have a wireless gamepad for PC, thanks to you! Liked the video and subscribed for sure.
how did you disable the security policy of automatically installing unknown devices?
No luck. I followed every step. The host address and everything appear on the SCPMonitor and it says that it’s charging and all that, but when I remove the USB cable it doesn’t connect. I restarted my PC twice and reinstalled the drivers several times, but nothing’s working.
@Wiltshire Tutorials Yes, of course. But it still didn’t work.
+Detective Hamza Did you press the PS button to attempt to establish s connection?
+Logan-gamer You’re welcome. Thanks for watching
I’ve done everything you’ve said on your two videos (including the unblock SCP files in properties) and everything is fine and dandy except the Host Address is still disconnected. The controller is still recognized in Pad 1, the driver installation went without a hitch with all four items and whenever I disconnect or reconnect the monitor program recognizes that as well. However on this video you say that if the Host Address says disconnected it failed to install or I need to reboot. I rebooted after each installation and I corroborated with your previous videos concerning the full instalation and even without installing the bluetooth stuff all four items still show up as successfully installed after the installation of said drivers. This was done on Windows 7 so of course I didn’t ‘Force Install’. What do I do at this point in order for the goddamn Host Address to show up/make the drivers work? I’m very frustrated and tired at this point and I’d really like some help, thanks for the fantastic videos.
Hello Wiltshire and thank you for the tutorials.
Unfortunately, it looks like the Broadcom bcm20702a0 found on the Asus Impact z87 motherboard won’t work with SCP. I followed the tutorial to the tee but the SCP monitor comes up with nothing. even after the restart.
Any further ideas?
Thank you so much bro, worked and really apprecciated. +1
i did everything u said to do but when i check my monitor the host adress stays disconnected can u help me to solve this plse??
How to Use ANY Bluetooth Dongle/Adapter on SCP DS3
Показать панель управления
Комментарии • 2 297
For those who are looking for the original drivers:
-go to device manager
-right click your bluetooth dongle
-properties
-driver
-update drivers
-browse my computer
-let me pick from a list
look for generic usb bluetooth etc and install it and you are done 🙂
Great videos, thank you so much! I hated MotionInJoy and this was a wonderful solution! Plus, I can now use my bluetooth dongle that I previously wasn’t able to use with my controller. If you want a next project, maybe figure out how we can use the BT dongle for using our PS3 controllers, while also using it for other stuff. Or make it easier to switch drivers?
A massive thank you Wiltshire Tutorials you saved my life! I updated windows 10 and it deleted the drivers for my USB dongle (and installed a load of bloatware), but this video saved the day 🙂 Many thanks.
You’re welcome. Glad I could help in some way. Thanks for watching
Hello, Mr. Wiltshire! Thanks for all your video tutorials, as they have been super helpful.
Question about Bluetooth. I use a DS3 on Windows 8 and have followed all your install instructions, albeit using more recent versions of the SCP software and an ASUS USB-BT400, since your recommendation has been discontinued.
While this works, it seems like there’s a lot of lag, unresponsiveness to buttons, or that maybe it just goes»meh» once in awhile and buttons tend to «stick.» Have you encountered that or know what I mean? I could use a hand.
Hey, sorry for bothering you but I’m having trouble. It keeps saying «Host Address: «. I’ve already tried restarting the computer and plugging back the usb dongle back into the computer after getting back on the desktop. I’ve also reinstalled the drivers. The issue is still there. Do you have any suggestions?
This was really helpful! I’ve been months trying to figure out why this worked with the server but after closing it it didn’t work anymore. I was able to use my controller wireless like so but it was a pain to have to figure out what I did for it to work. Turns out I just needed to use this instead. And since I have exactly the same bluetooth Qualcomm atheros AR3011 3.0 but with HS adapter, this was such a lucky find. Giving you like and sub bro
The key to all my problems, right here. Thank you very much!
Gracias amigo eres genial!! :D, me subscribo, saludos desde México :). PD, no se inglés pero tus tutoriales son tan buenos que se entiende muy bien desde la navegación de archivos.
Thank you so much! This helped out alot! Well done on the clear instructions!
@Adam Johnson You’re welcome. Thanks for watching
if it says reserved, try to restart the service or server (whichever you use)
did you find a fix for this?
I definitely reccomend backing up your drivers completely before doing this, its also a good idea to backup your entire registry too. you can use Glary Utilities which has these functions in it’s advanced tab. This way if there is a major issue or if you decide to abort you have fairly perfect fallbacks to get your bluetooth dongle or any other device back to its working order.
Definitely a good practice
Helpful and simple guide, works well even today on Win10!
Glad to hear you found this useful. Thanks for watching and for leaving some feedback
I really like how you make your tutorials, they are very professional, help me really much! thank you! +sub 🙂
I’m glad that you like my videos. I do put a lot of effort into my videos! Thanks for watching and subscribing. I appreciate it a lot!
Hey thanks for the tutorial, it helped alot! I was wondering what is the theme of your desktop? How do I arrange the folders at the side like that?
Guys, when you have it plugged into USB and it says charging. hit the Pair button on the SCPSERVER.. this will lock the PS controller onto the bluetooth dongle you the drivers set to. unplug and wallah
@Mr. Schäeffer Thanks it worked man, I did a lil bit of researched on how to use it and it worked 😀
@#TambayanMusic Dude just use vigem with shibari is so much better i install it and never had a problem anymore.
@Brett Knibbs Now scp is deprecated, just use the vigem, with shibari is so much better and you don’t need to sacrifice your bluetooth dongle o use it and a ps3 controller and use the same dongle for other devices as well.
Absrapper Chainmastah buy a switch pro controller mate 15 quid Amazon and they just work. I use a program called rewasd to remap the buttons to PS4 and Xbox respectively because some games don’t like PS4 pads and some don’t like Xbox controllers. To keep using scptoopkit an inplace upgrade on windows which is basically a refresh of windows 10 will make it install every single time first time as long as the Bluetooth chip is compatible. Switch pro is identical pad just made it all work dead easy
Very helpful! Solved my bluetooth dongle issue, and I’m now up and running on Windows 8.1. Thanks!
@BFarmer1980 Glad to hear that. Thanks for watching.
Great Tutorial, worked after uninstalling old drivers and starting fresh. Much simpler than MotioninJoy.
@DigitalShadow Glad to hear that. Thanks for watching
Thanks you so much! Spent all day getting headaches trying to configure this. Your tutorial really helped!
You’re welcome. Thanks for watching
YOU ARE BRILLIANT!
i love the way how you demonstrate and you helped me so often until i reach my aim. Thanks a lot mate, really. Thumbs up und sub!
+iko3301 I wouldn’t call myself brilliant. I would say I have experience. I’m always glad to help! Glad to hear you got things working too! Thanks for watching, liking and subscribing. I appreciate it!
Thank you sooo much for your tutorials on SCP DS3 🙂
I basically did everything right but forgot one step so it didn’t work
@r3toun You’re welcome. Thanks for watching
Absolutely the most helpful video I have ever watched on X-vid. Thank You.
you are one of the best tutorial people on youtube in my opinion. every time i had an error there was a link to another video by you with all the drivers and files wrapped in a file with a pretty bow on top by you. thanks man you deserve this favorite, like and new subscriber
@crackthenut I appreciate the feedback. I try my best at tutorials. I’m glad you like them! Thanks for watching, liking, favouriting and subscribing!
Hey man, loving this tutorial! Question though, I followed all of the on-screen instructions and everything went the same up till you disconnected your PS3 controller and it synced with the BT. Mine keeps blinking for a while, then turns off, and the driver slot still says reserved. I got all the goodies installed, is there anything else you can think of for this to sync up?
hi
its paired but only working with usb when i remove usb it says reserved but doesnt bluetooth pair please help
the host is connected :54:35:30:8A:08:62
but the pad 1 reserved after removing usb
quick answer plz
And again, I love your tutorials
+RygalKirisame Glad you like my videos! Thanks for watching!
Thank you! I didn’t want to bother with motioninjoy and this was the perfect alternative for me! SCP is my favorite.
+Sara Ann You’re welcome. Thanks for watching
THANK YOU SO MUCH! This, along with 2 or 3 of your other SCP videos, really helped me out mate.
+Graasvin You’re welcome. Thanks for watching
Very very helpful 🙂 I’ve followed dozens of guides but the bluetooth never worked for me. Zadig did the trick! Thank you.
Glad to hear that. Thanks for watching
Is it possible to roll back to the original BT driver after replacing it?
Tnak you so much you helped me a lot 🙂
ArtificialSpirit Oh my god thank you so much kind sir. I accidentaly installed the bluetooth thing to my usb wireless connection thingy and it stopped working. Then I did what you said here and my computer restarted. I was so afraid that it wasn’t going to work and it worked. Thank you so much.
i tried this method, but no luck, it keeps installing back DS3 driver after «Scan for hardware changes»
In device manager, at the end of the list under «Universal Serial Bus Devices» you will find your bluetooth device listed there, just uninstall it then from the «Action» menu choose «Scan for hardware changes» and the driver will be installed automatically by windows and you will get your old Bluetooth driver.
Hello, Wiltshire. Thanks a lot for the tutorial. I am having a strange problem with this method. It works great for a time, but after I shutdown my computer, sometimes my bluetooth adapter stops pairing with the controller. I noticed that HCI version that is displayed on the Scp monitor is 6xxx, when it works (pairs), but after a pc restart, it sometimes change to something like 7xxxx, thus my controller stops pairing with the bluetooth adapter. To solve this, I must reinstall the default bluetooth driver, swap driver with zadig and then config again at scp driver. I also disabled the windows update for drivers and disabled the windows option to automatic install drivers, but it did not solve the problem. Is there a way to fix this problem? Like manually changing the HCI version, manually pair the controller. Could you please help me? Thanks in advance.
Thanks, man. Your Tutorials for the PS3 controllers were a big help!
+Guy Person You’re welcome. Thanks for watching
Thanks for all the help :D! Great video and very helpful.
@shadows879 You’re welcome. Thanks for watching
Thank you so much for these videos. I was facing a problem in which my PS3 was turning on whenever I unplugged the DS3 usb cable from my PC. I fixed it by removing the power cord from my PS3 and then the DS3 was properly synced to the dongle.
Mine doesn’t work 🙁 I have Asus BT400. I tryied my usb to usb 3.0 and 2.0. I am using windows 8.1 64 bits.
I did everything on this video and it still doesn’t work.
On host addres it says series of numbers like you but those are different.
Amazing. It works! No harm. I always wanted to get that working and I finally did it thank to You.
Glad to hear you got things working. Thanks for watching.
thanks man this helped! i was going crazy trying to figure out how to connect it to my bluetooth dongle, it felt hopeless, like i needed a degree in quantum computing, then i stumbled upon your little gem of a video 😀
@Wiltshire Tutorials u saved my life lol
Glad to hear you things working! Thanks for watching
THANK YOU! finally a video on SCP bluetooth where someone actually is competent to explain what to do. After many uninstall re-install watching videos on how to install SCP NONE show this programme to use. Great stuff you have an IQ of 1 million and twenty point 5!
You’re welcome. Glad I could help. Thanks for watching
Thanks a ton, helped a lot!
Yo, i was able to use bluetooth once, but after i restarted my computer it stopped working.
Any ideas?
Already restarted computer
Replace the driver with the preset again man
Try open the ScpServer and see what happens
+Nishi Notrel Same problem here, any solution yet?
Hey dude! I had some trouble with bluetooth on your other vid and then decided that I wanted to use my bluetooth adapter for Wii emulation. Turns out Wii emulation was more of a novelty and I never really played Wii on my desktop anymore so I gave this another go, this time using the method outlined in this vid, and it worked!
Thanks for the tutorial, man! I notice there are 2-3 frames of input lag via my USB 4.0 adapter, but that’s practically unnoticeable. 😀
Hi, thanks for the tutorial, and it works perfectly. However I used the bluetooth controller on my motherboard and I don’t know how to disconnect now. My DS3 controller is forever connected to my computer. Is there a way to restore the bluetooth to its initial state, or disconnect my controller? Thanks again.
Hi Mate, thank you for the video. Could you please tell us what tool are you using to organise your desktop items / shortcuts? I saw it on the begening of the video and looks very cool.
@David Veselinov you’re welcome! Thanks for watching
@Wiltshire Tutorials thank you so much
######Important Notice#######
For all those getting the «reserved» or «none» message when trying to pair, it’s because your dongle is not good enough i.e. 2.0 is too low. I used a 2.0 and i got the «reserved» and «none» however I then got a 4.0 and it worked.
*NOTE my STEPS with 4.0
1) plugged in controller whilst installing driver via zadig
2) opened scp monitor then unplugged controller and saw «reserved» error so i reconnected ps3 controller
3) whilst scp monitor is opened and controller plugged in, i opened scp server then unplugged controller
4) went back to scp monitor and voila! it works!
#######THUMBS UP SO PEOPLE CAN SEE THIS######
Well how to you fix that?
Server Application has no effect for me, i’m on 4.0
It all looks good in the SCP monitor, but i get nothing in server
That is an issue with you not getting the SCP Service to install
@***** Playstation controllers require a minimum of Bluetooth version 2.1
@***** IT WORKED YOU DID IT U HAVE THE SOLUTION I LOVE THANK U LOL 😀
Hey, great channel great videos, helps me every time!
here’s the deal, I got a cheap dongle I got for like 2$.
my PS3 controller worked great with a USB cable (thanks to 3 videos I think you did on the subject). and when its connected with a cable the monitor shows Host address and charged.
I follow the steps of this video and my Dongle name is Generic Bluetooth Radio. after the tutorial the name changed to BTH DS3 Device. my controller seem to connect to it. my 1 led is on and the monitor shows a Host address and Pad1 shows «none» at then end. even tho it doesnt seem to work. when I try to use it game wont respond, only when I connect my cable back.
Cheap eBay dongles tend to not work. I recommend the Asus BT-400
From man to man, for what you did, I LOVE YOU. you helped me a lot dude thanks (Y)
@JOKER KYZAR You’re welcome. Thanks for watching
Odd, I’m not really sure why it is doing that :/
It’s already disabled and I don’t see how that could be the problem since after a restart my built in BT is still not detected as a BT receiver. The driver is not overwritten but the BT dongle seems unable to detect my DS3 each time the system is restarted.
Try disabling the auto driver installation feature on Windows?
Thank you so much! It worked for me. Just bought a random brand bluetooth dongle and when I selected XBOX 360 controller in the list it didn’t work, but when I selected DS3 Driver it showed «upgrade» instead of «replace». Then it worked just like you showed.
You’re welcome. Thanks for watching
the ones that arent blue inside
I used just a regular usb 2 port.
can u tell me in which port did u put it?
Thank you so much that got mine working also
Hey! The tutorial works perfectly for the first time I connect my controller. But after disconnecting once, I can’t reconnect it again via bluetooth. So, how do i reconnect it? is there any shortcut like there is L1+R1+PS Button for disconnecting? Or I have to connect via USB again and unplug? It isn’t working actually.
Thank you so much! saved me hours of trying to figure out how to install this on my aw17
Glad I could help. Thanks for watching
Thank you for the explanation, your video is very helpful 🙂
+Juhanda S. You’re welcome. Thanks for watching
Thank you so much my Friend, i have been trying to get this paired for days, for some reason scp was not doing it automatically, and i new my adapter was supported, Great job
I FINALLY GOT IT TO WORK! YOU LEFT OUT ONE IMPORTANT MESSAGE. YOU NEED TO RUN SCPSERVER.exe ON THE BACKGROUND. TRY THIS IF OP’S VIDEO NOT WORK FOR YOU.
just says error now instead of Disconnected
@Utku Man i searched and looks like inputmapper only works with ds4 and not ds3 at least in bluetooth thats sad :/
do you use a dongle? I have bluetooth 4.2 but it wont work still
Where can I find scpserver.exe? answer please.
Thank you! I installed the latest (pre-release) build of SPCToolkit, and it did not recognize my bluetooth Dongle and therefore never installed this driver. I couldn’t figure out why my controllers were no longer synching to my bluetooth, but this made it clear and also provided a solution.
I also used ScpToolkit before and followed the tutorial, but it still doesn’t work. Please help.
+CandyCinema You’re welcome. Thanks for watching
Wiltshire, thank you! THIS made it work wirelessly with my ASUS BT400 4.0. The main video for some reason only did it wired. Cheers!
Worked just as easy as you said, was going through pain trying to get this to work before, thanks alot.
You’re welcome. Thanks for watching and for leaving some feedback!
Thanks a lot, been playing around with the thought of buying a new wireless controller for pc (been using ds3 with usb so far).. now the bluetooth dongle was much cheaper 🙂
Glad to hear you got things working. Thanks for watching
it works but it always stops working when i restart my computer. for examply i install it. it works to play the game, and then when i turn my computer off and turn it on again the controllers wont connect until i manually uninstall through device manager and reinstall with zadig. how do i make the custom driver permanent?
@Brett Knibbs what is it?
So, what was the easy way around it?
There is an easy way round that but being 2 yrs ago u probably solved it lol
Try the newest scptoolkit. Didn’t even need to use zadig anymore
I know it’s been sometime since you’ve made this video, but I wanna thank you, because it’s so so so so much better than Motioninjoy, I wish I saw this video when it came out. Thx again.
This clip literally saved me so many hrs and frustrations. Thank you.
You’re welcome. Thanks for watching
So, after a month I bought a new decent dongle and it works perfectly, but it does take a shitload of time for the computer to identify the controller (as opposed to a few seconds on the PS3, the PC takes about 30s-1min30 to find the controller). Other than that, its perfect. Thanks for the tutorial.
Excellent tutorial, the only one that worked for me!
Glad to hear that. Thanks for watching!
I did everything up to the host address thing, it was not there so i restarted my computer, then the monitor doesn’t open, the shortcut and the non-shourtcut..
please help
EDIT: k, i got it now it was open in the background. but i have another problem, it still says no host address.
what do i do now?
I got it to work awhile ago, not sure what the issue was.
@_Just Try uninstalling scp then install it again in Install Summary i don’t see my USB Bluetooth but it works.
@_Just you need to run the scp server first then press bluetooth buton on the laptop (for me its fn + F3) and then connect the controller that worked for me but my laptop freezes when controller isconnected for some szeason
@DaCookieMonsta Having the same problem with an ASUS BT400 adapter. :\
Watching your video, I finally got my PS3 controller to work with my BT400 dongle wireless! I gave a thumbs up and you now have a subscriber! Thank you very much.
Glad to hear you got things working. Thanks for watching and subscribing
Thank-you It worked like a dream! You Rock Man
Man you’re awesome. I finally get rid of DS3 Thanks to you!!
Thank you very very much, I tried everything to get out of MiJ but it always prevent me to detect my bluetooth dongle so I finally realize that disabling the security policy of automatically installing unknown devices is the solution of escaping from it. Then I repluged my dongle and it worked and identified itself as a bluetooth adapter(Hell Yeah!!) then I tried your solution without MiJ and worked! Finally I have a wireless gamepad for PC, thanks to you! Liked the video and subscribed for sure.
how did you disable the security policy of automatically installing unknown devices?
No luck. I followed every step. The host address and everything appear on the SCPMonitor and it says that it’s charging and all that, but when I remove the USB cable it doesn’t connect. I restarted my PC twice and reinstalled the drivers several times, but nothing’s working.
@Wiltshire Tutorials Yes, of course. But it still didn’t work.
+Detective Hamza Did you press the PS button to attempt to establish s connection?
+Logan-gamer You’re welcome. Thanks for watching
I’ve done everything you’ve said on your two videos (including the unblock SCP files in properties) and everything is fine and dandy except the Host Address is still disconnected. The controller is still recognized in Pad 1, the driver installation went without a hitch with all four items and whenever I disconnect or reconnect the monitor program recognizes that as well. However on this video you say that if the Host Address says disconnected it failed to install or I need to reboot. I rebooted after each installation and I corroborated with your previous videos concerning the full instalation and even without installing the bluetooth stuff all four items still show up as successfully installed after the installation of said drivers. This was done on Windows 7 so of course I didn’t ‘Force Install’. What do I do at this point in order for the goddamn Host Address to show up/make the drivers work? I’m very frustrated and tired at this point and I’d really like some help, thanks for the fantastic videos.
Hello Wiltshire and thank you for the tutorials.
Unfortunately, it looks like the Broadcom bcm20702a0 found on the Asus Impact z87 motherboard won’t work with SCP. I followed the tutorial to the tee but the SCP monitor comes up with nothing. even after the restart.
Any further ideas?
Thank you so much bro, worked and really apprecciated. +1
i did everything u said to do but when i check my monitor the host adress stays disconnected can u help me to solve this plse??
bluetooth not working even though the controller «connects to it» #153
Comments
LichBreed commented Jan 11, 2016
hey having problem to get the controller to work via bluetooth.
have installed the dirver while the controller and the dongle both plugged in,the scp monitor shows host address,in devices and printeres the bluetooth listed as BTH DS3 device.
when i turn the controller on wirelessly a message pops up saying plugged in port#1 on virtual bus and the monitor says bluetooth 000000 none on pad 1 but the controller still keeps blinking and gets turned off after a while.
anyone has any clue about how to fix it?
Edit:running a fake ds3 and win7
ScpToolkit_Log-Package_Vova_1452548164.zip
The text was updated successfully, but these errors were encountered:
Dorque commented Jan 12, 2016
I did a search on your bluetooth adapter VID and PID from your logs and I got some generic bluetooth 2.0 adapter here: http://amzn.com/B001EBE1LI.
I don’t think this adapter supports EDR. To connect to a DS3 controller, you need at least Bluetooth 2.0 + EDR. For DS4 I believe you need at least 2.1+EDR but don’t quote me on that since I don’t have a DS4 yet.
gawron89 commented Jan 14, 2016
i have exactly the same issue with ds3, and i have asus bt400 which is officially supported by scp and has EDR for sure
from installation logs my dongle was still not detected, there was no bt logs like in this pic http://forums.pcsx2.net/attachment.php?aid=47326 but my device was detected in scpmonitor
on side note: for pairing ive used http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html. if you have already paired device put some random address and update then put again valid address of dongle, that should update it. dunno which step actually helped here but now its working
//edit
after more testing looks like im forced to use old version + zadig because new version is not compatible with it, no need to use sixaxispairtool
war1ox commented Jan 22, 2016
I have had this issue since the last 2 or 3 releases. The previous release worked flawlessly, I was able to use Bluetooth no problem. Is there a way to download previous versions of this tool?
I install everything correctly, and even restart. The LED says connected to port 1, and it triggers the connection sound when powered wirelessly. The problem is that it doesn’t seem to work in games. Not even wired.
alansublime commented Oct 20, 2017
gawron89 friend works without problem
TheVirusWar commented Jan 23, 2018
I have to reply to this topic even tho its old. I just have to.
I’ve been killing myself to make my controller work with bluetooth and just couldnt do it.
First I tried to do it on the Windows 10 and gave up after of literal days of tries. But now I reinstalled Windows 7 (for fun) and later I came across the PS3 controller I bought from some guy for 5$, it had a busted usb port and I’ve re-soldered a new one (got 15 female usb connectors off aliexpress for less than a buck!), so I decided to try again.
And as the last time, I’ve been trying to make it work for a couple of hours until I came across this topic and the fella up there, @war1ox, saying v1.6.133.15324 works. Had nothing to lose, gave it a try.
.
It f#$king does work. IT F#$KING WORKS!
I didnt do a damn thing! Just installed it and worked out of the box!
-btw: I have a legit sixaxis PS3 controller and a bt dongle CSR8510 A10 (VID_0A12&PID_0001); Windows 7 also (I dont think it matters, but just putting it in here)
Footer
© 2022 GitHub, Inc.
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Как подключить контроллер от PS3 к компьютеру с помощью Bluetooth
Как подключить контроллер от консоли PS3 к ПК
Геймпад от PlayStation 3 можно использовать не только при игре на консоли, но и на обычном компьютере. Мы расскажем вам, как это делается.
Любители видеоигр на Playstation иногда не против поиграть и на компьютере. Для этого можно использовать тот же геймпад DualShock от PS3, но есть некоторые нюансы. Контроллеры для ПК выпускают с поддержкой технологии XInput, а для плейстейшн используется другая, DirectInput. Поэтому понадобится дополнительный софт: MotionJoy или альтернативные варианты.
Что такое DualShock и как его подключить
Данная технология имеет поддержку работы с Windows «из коробки», то есть приобретать что-либо дополнительно, чтобы подключить джостик к компьютеру не нужно. Прямо в комплекте будет USB-кабель для подключения к компьютеру. Драйвера тоже в большинстве случаев будут установлены автоматически.
Вариант 1: MotionJoy
В случае, если игра не поддерживает технологию DirectInput, то нормально поиграть в неё с помощью геймпада будет очень сложно. Именно в таких случаях рекомендуется скачивать и устанавливать на компьютер специальные эмуляторы, которые призваны решить проблему. Если используется подключение типа DualShock, то лучше всего выбрать эмулятор MotionJoy.
Порядок взаимодействия с ним выглядит следующим образом:
Выполните запуск MotionJoy из интерфейса Windows. Во время распаковки вы можете изменить путь установки эмулятора, создавать или не создавать ярлыков для быстрого доступа. Не будем подробно останавливаться на установке эмулятора, процесс здесь выглядит очень стандартно.
После установки выполните запуск программы, а также подключите контроллер к компьютеру через USB. Для начала нужно установить все требуемые драйвера. Обычно Windows их уже устанавливает по умолчанию, но бывают исключения, поэтому выполнить это действие будет не лишним. Раскройте вкладку «Driver Manager». Здесь нужно нажать на кнопку «Install all»
Ожидайте появление на экране надписи «Install completed».
Теперь переключитесь во вкладку «Profiles». Обратите внимание на заголовок «Select one mode». Здесь выбор варианта подключения зависит от того, в каких играх будет использоваться джостик. Если речь идёт о старых играх, то лучше выбрать «Custom-Default»
Если вам нужно выполнить запуск игр, которые есть под PS3, то можно оставить о. При условии, что вы запускаете игры, которые выпускались также под Xbox, но не под PS3, то используйте режим «XInput-Default». После выставления настроек нажмите на кнопку «Enable»
Если речь идёт о старых играх, то лучше выбрать «Custom-Default». Если вам нужно выполнить запуск игр, которые есть под PS3, то можно оставить о. При условии, что вы запускаете игры, которые выпускались также под Xbox, но не под PS3, то используйте режим «XInput-Default». После выставления настроек нажмите на кнопку «Enable».
Для проверки работоспособности геймпада нажмите на кнопку «Vibration Testing». Если всё нормально, то джостик должен завибрировать.
Когда вам потребуется отключить джостик воспользуйтесь кнопкой «Disconnect». Она то же расположена во вкладке «Profiles».
Вариант 2: SCP Toolkit
Данная программа размещена на сервисе GitHub и имеет открытый исходный код, плюс распространяется полностью бесплатно. С её помощью можно выполнить эмуляцию джостика от PS3, благодаря чему компьютер видит его как геймпад от Xbox. Это улучшает взаимодействие с Windows и снижает вероятность сбоев. Также эта программа может работать не только с USB-подключениями, но и с беспроводными Bluetooth.
Порядок настройки выглядит следующим образом:
У данного решения есть серьёзный недостаток – использовать его для старых игр слишком непрактично. Иногда он вообще может не работать, но эта проблема обычно касается только старых игр. Если вам нужно, чтобы вы могли играть как в новые, так и старые игры, то воспользуйтесь первым вариантом.
Контроллер для PS3 можно запустить на компьютере через USB или Bluetooth соединения. Однако могут возникнуть проблемы при запуске, как старых, так и новых игр, поэтому рекомендуется использовать различные эмуляторы, решающие эти проблемы.
Вариант 1. Используем MotionJoy
Инсталлируем MotionJoy на ПК
Так как PS3-контроллер формально не предназначен для того, чтобы его использовали на ПК, официально доступных драйверов для него не существует. Тем не менее, с помощью одной небольшой программы вы все-таки можете установить для него соответствующий драйвер:
Соединяем контроллер с компьютером и MotionJoy
Инсталлируем и настраиваем PS3-контроллер
Нюансы работы под Windows 10
Иногда пользователи жалуются, что MotionJoy не удается запустить на компьютерах с Windows 10. Если у вас возникла та же проблема, попробуйте изменить системное время на любую дату 2014 года. После подключения настройки можно будет вернуть обратно.
Чтобы изменить дату, нажмите правой кнопки мыши на часы в правом нижнем углу и выберите параметр «Настройка даты и времени». Отключите автоматическую установку и нажмите «Изменить». Теперь можете установить нужную дату.
Как настроить подключенный джойстик
По логике обновлений, если подключить новое устройство к компьютеру с относительно свежей Windows на борту, система обратится к сетевым базам, распознает устройство и автоматически докачает его драйвер. После этого вы сможете пользоваться им так же удобно и без ограничения функций.
Действуйте по следующему сценарию:
Теперь проводное соединение должно работать.
Перед тем, как подключить джойстик к компьютеру по Bluetooth, убедитесь, что Bluetooth-адаптер подключен и работает корректно. Для этого проверьте, как соединяется какое-нибудь другое устройство (смартфон, планшет, мышь и т.д.) Процедура установки драйвера для работы по Bluetooth выглядит так:
Стоит отметить, что в старых геймпадах, которыми PS3 комплектовалась в первый год выпуска, вибромотор отсутствовал. Если ваш контроллер из этих партий, то вибрации, конечно, не будет. Вам надо будет просто дождаться конца установки и проверить его в реальной игре.
Как подключить DualShock 3
Однако после установки может быть нужна дополнительная синхронизация, которая избавит вас от некорректного распознавания действий и от разрывов связи. Делается это так:
После этой синхронизации необходимо обеспечить её работу в режиме Bluetooth. Для этого:
Всё! Теперь ваш джойстик от Sony PlayStation способен работать и с компьютером. После вышеописанных процедур все жесты и нажатия должны распознаваться корректно. Рекомендуем вам сравнить ощущения при проводном и беспроводном подключении и пользоваться тем, которое вам больше понравится.
Вариант 2. Используем SCP Toolkit
Как подключить геймпад ps3 к компьютеру альтернативным путем? Есть еще одна хорошая программа, которая называется SCP Toolkit. Скачать ее тоже можно абсолютно бесплатно. Этот софт заставляет ПК воспринимать дуалшок от PS3 как контроллер Xbox. Устанавливается элементарно и не требует особых настроек.
Инсталлируем ScpToolkit и драйверы
Скачайте файл ScpToolkit_Setup.exe, запустите его и распакуйте файлы в любое место. После распаковки у вас появится окно с большой кнопкой «Run Driver Installer» — нажмите ее. Программа установит на ПК драйверы для Xbox.
Подключаем геймпад
Теперь подключаем джойстик PS3 и ждем, пока его найдет система. Обычно это происходит быстро: геймпад появится в окне программы. Останется только установить его (кликнув на кнопку Next). После этого обычный контроллер от Playstation3 будет определяться как аксессуар Xbox, и вы сможете без проблем играть в современные игры на ПК.
Теперь вы знаете как минимум 2 способа как подключить контроллер от пс3 к ПК. Перед тем, как заняться подключением, убедитесь, что ваш дуалшок заряжен полностью — иначе батарея сядет в самый неподходящий момент и придется начинать все сначала.
Теперь пытаемся использовать геймпад от PlayStation 4
Как подключить два джойстика к компьютеру: особенности процесса
Ну, хорошо, вы хотите пальнуть из пушки по воробьям и оживить PlayStation 3 с помощью геймпада от PlayStation 4. Это возможно, мало ли какие причины могут возникнуть
Причём обращаем внимание, работа будет доступна в любом режиме — и с проводом, и без провода
Чтобы выполнить подключение, снова убеждаемся в полном заряде аккумулятора DualShock 4.
В случае необходимо джойстик зарядите
Дошла очередь и любого подвернувшегося джойстика
Ну, это слишком сильно сказано — «любой подвернувшийся». Но, действительно, вероятность поиграть есть всегда, особенно если джойстик от Microsoft и правильно выбрать способ подключения (возможно, просто повезёт и вы угадали, благо выбор невелик).
Что касается способа, то их два:
Кабельное подключение проще и надёжнее
Беспроводное подключение, да ещё «неродного» джойстика, часто заканчивается неудачей, он может не распознаться или консолью, или компьютером.
Для подключения геймпада от компьютера потребуется стандартный набор:
Если же появилось желание теперь использовать DualShock 3 на компьютере, то тут уже будет не обойтись:
Итак, подключаться«сторонняя» управляющая периферия к PS3 будет по такому алгоритму:
Даже если вы в будущем и этот «неродной» джойстик намереваетесь использовать без проводов, то первичное подсоединение делается через провод. Если всё же и подключение хочется сделать wireless, то поступайте так:
Понять, улыбнулась вам удача или нет, можно очень просто — попробуйте поиграть в любимую игру; если она «дышит», то всё в порядке, устройство подошло
Теперь попытаемся использовать DualShock 3 на компьютере. Порядок действий не отличается от подключения любой другой периферии, учитывая даже такой обычный шаг — вы предварительно должны раздобыть драйвер DS3 для соответствующей системы на ПК. Далее:
Если вы хотите провести установку удалённо, то потребуется wireless-приёмник в USB-разъёме. Затем:
Вариант 3. Покупка универсального геймпада
Безусловно, контроллер PS3 красив и удобен. Но есть ли смысл плясать с бубном, подключая его к ПК? Если у вас нет желания возиться с установкой, можно поискать универсальный джойстик, который поддерживает и DirectInput, и XInput. Соответственно, вы сможете использовать его как с Playstation3, так и с обычным компьютером. Цена вопроса невысока: например, вот такой геймпад Logitech G Gamepad F310 стоит всего 1500 руб.
Правда, это проводной вариант — модели с подключением по Bluetooth будут дороже.
Загрузка драйвера
Практически у каждого геймера рано или поздно возникает вопрос о том, как подключить геймпад от PS3 к ПК. Не трудно догадаться, что компьютер должен распознать устройство. С этим нередко возникают проблемы.
Вообще, иногда достаточно просто подключить джойстик от Play Station 3 через USB-провод к компьютеру и нажать на круглую кнопку в центре устройства. Произойдет включение геймпада. Операционная система автоматически найдет необходимый драйвер и установит его.
Следует обратить внимание на то, что MotioninJoy позволяет настроить геймпад под себя. Ничего особенного в этом процессе нет. Достаточно просто перейти в соответствующую вкладку приложения, а затем сохранить измененные настройки.
Что нужно
Первый этап – подготовка. Как подключить геймпад от PS3 к ПК? Для этого пользователю придется подготовить определенный инвентарь. Без него не получится провести процедуру.
Чтобы играть на компьютере при помощи джойстика от Play Station 3, необходимы следующие предметы:
Больше ничего не потребуется. Следует обратить внимание на то, что «Блютуз»-адаптер не является обязательной составляющей. А вот все остальные предметы необходимо подготовить. Без них невозможно обойтись.
DualShock 3
Все чаще и чаще у игроков возникает необходимость подключения DualShock 3 к ПК. Данный процесс будет немного отличаться от ранее предложенного алгоритма. Например, работать придется с другим приложением. А точнее, несколькими программами.
Как подключить геймпад от PS3 к компьютеру? Достаточно следовать некоторым простым указаниям. А именно:
Подключение DualShock 3 иногда вызывает проблемы. В частности, из-за синхронизации программ с геймпадом. Как правильно провести процесс? Об этом будет рассказано далее!
Синхронизация
На этом этапе произойдет регистрация джойстика. Но это еще не все! Как подключить геймпад от PS3 к ПК? Завершить действия предлагается при помощи синхронизации устройства с Bluetooth Dongle.
Что для этого потребуется? Нужно:
Теперь можно проверить работоспособность джойстика. Как правило, проделанные действия приводят к тому, что он начинает работать на компьютере. Вот и все! Отныне понятно, как подключить геймпад от PS3 к ПК. Практика показывает, что далеко не все BT-адаптеры совместимы с джойстиком. На этот нюанс должен обратить внимание каждый пользователь.
Основные проблемы подключения геймпада от PS3 заключаются в поиске драйверов для него. Следуя указанным инструкциям, можно без особого труда поиграть с использованием джойстика Play Station 3. Даже начинающий пользователь справится с поставленной задачей. Главное отыскать необходимые программы для реализации задумки.
Как зарядить джойстик PS3: через приставку и другие способы
Беспроводные джойстики давно покорили сердца владельцев Sony PlayStation. Они компактные и удобные в использовании, что придает максимально комфортные условия для игры. Такие геймпады работают за счет встроенных аккумуляторов. Существует множество способов их зарядки. Для этого необходимо иметь специальный кабель, который комплектуется вместе с приставкой.
Основной способ — через приставку
Основным способом подпитка геймпада от PS3 осуществляется через консоль. Для этого необходимо иметь специальный кабель, который соединяет приставку с геймпадом.
Тут всё просто: узкий конец присоединяется к джойстику, а USB порт к приставке. Главное, чтобы все это время консоль находилась во включённом режиме.
После того как устройства были подключены через кабель, следует ожидать примерно три часа до того, как джойстик полностью зарядится.
Если есть в наличии более одного джойстика, то вам понадобится ПС3 USB Hub. Это устройство, позволяющее соединить несколько контроллеров одновременно. Хаб состоит из входа в разъем приставки и нескольких USB-выходов. К этим выходам и подключаются геймпады.
ВАЖНО! Для успешного проведения процесса требуется оставлять приставку включенной, иначе процесс не будет производиться. Используя такое устройство, можно сэкономить массу времени, которое понадобилось бы на каждое устройство по отдельности
Используя такое устройство, можно сэкономить массу времени, которое понадобилось бы на каждое устройство по отдельности.
Порядок действий
Это очень простой процесс. Для этого необходимо выполнить следующие действия.
Справка! Для использования джойстика его нужно предварительно оставить на зарядке 60 минут.
Для того чтобы игра была максимально комфортной, следует знать некоторые нюансы. Во избежание внезапного выключения джойстика нужно вовремя понять, что он разряжается. Это возможно благодаря индикаторам. Во время пользования контроллером индикаторы на торце прекращают мигать. Это свидетельствует о низком уровне джойстика. Во время подключения джойстика к приставке можно узнать об уровне заряда. Для этого нужно нажать центральную кнопку PS.
Важно! Используйте только оригинальную зарядку. Дешевые аналоги не смогут обеспечить стабильную работу
Другие способы
Помимо стандартных методов, существуют следующие способы:
Главным требованием таких способов является наличие USB порта.
Время зарядки зависит от уровня зарядка джойстика. Заряжать геймпад можно и во время игры на приставке. Но в это время он должен быть подключен к зарядному кабелю.
Возможные затруднения
При осуществлении зарядки могут возникнуть определенные трудности. Они могут возникнуть по самым разнообразным причинам. Однако не стоит паниковать. Вы можете попытаться исправить неполадки следующим способом.
Если ни один из указанных способов не смог решить проблему, следует обращаться в сервисный центр, прихватив с собой как геймпад, так и консоль.